PASS & SEYMOUR

Flexcor® Support Grips Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.50 - 0.61 in.

SNG WEAVE SUP GRP.5"CBL SNG EY

PSSFC050U FC050-U 785007980660
49.62 / EACH
http://schema.org/OutOfStock
Mayer-DDS-Flexcor® Support Grips Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.50 - 0.61 in.-1
  • Applications: Industrial
  • Construction: Support And Strain Relief Grips, Various Types Of Pulling
  • Country of Origin: Mexico
  • Indoor/Outdoor: Indoor, Outdoor
  • Length: 10 in
  • Type: Support Grip
  • Width: 0.62 in
FC050U: Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.50 - 0.61 inches, Bale Length 7-in, Mesh Length 11-in, Break Strength 770 lbs.
QTY
  • Product Description
  • Features
  • Specifications
FC050U: Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.50 - 0.61 inches, Bale Length 7-in, Mesh Length 11-in, Break Strength 770 lbs.
  • Features
    • Closed mesh support grips are used when the end of the cable is accessible.
    • Standard duty closed mesh support grips are designed for loads up to 600 lbs.
    • Vertical runs of no more than 100 ft.
    • They are available in a variety of eye styles and cable ranges for supporting electrical and fiber optic cable, metal rods, and tubing.
    • Support grips are woven of corrosion-resistant tinned-stainless steel wire.
    • Most Flexcor products have UL and/or CSA approvals. Please contact factory for approval information.
    • Bale Length: 7: Mesh Length: 11
  • Certifications
    • CSA Listed
  • Specifications
    • Length : 10.0 in
    • Eye Style : Single
    • Width : 0.62 in
    • Country of Origin : Mexico
    • Mesh Type : Closed
    • Type : Support Grip
    • Indoor/Outdoor : Both
    • Mesh Length : 10.0 in
    • Maximum Cable Range : 0.5 in
    • Minimum Cable Range : 0.61 in
    • Application Sector : Industrial
    • Approximate Break Strength : 567.0 lb
    • Cable Diameter Range : 0.500-0.620 in
    • Capacity : Various Cable Diameter Ranges
    • Standard : UL/CSA Approval (consult factory)
    • Mounting : Consult the Factory for Mounting Recommendations
    • Construction : Various Types of Pulling, Support and Strain Relief Grips
    • Special Features : Standard closed mesh support grips are designed for loads up to 600 lbs. and vertical runs of no more than 100 ft. They are available in a variety of eye styles and cable ranges for supporting electrical and fiber optic cable, metal rods, and tubing. Closed mesh support grips are used when the end of the cable is accessible. Support grips are woven of corrosion-resistant tinned-bronze wire.
    • Product Line : Pass & Seymour