Appleton™ U-Line™ ECCL/ECC Factory Sealed 20 Amp Cable Connectors - PN ECCL2023

U-LINE CONN W/FLIP COVER

APPECCL2023 ECCL2023 781381440769
896.14 / Each
http://schema.org/OutOfStock
  • Amperage: 20 A
  • Horsepower: 1 hp, 2 hp
  • Number of Wires: 2
  • Voltage: 125 V, 250 V
U-Line™ ECCL/ECC Factory Sealed 20 Amp Cable Connectors provide an easy way to extend the reach of your power supply to areas where a standard or U-Line™ receptacle may not be available. A gasket in the throat of the cable connector seals around the U-Line plug powering your equipment, protecting against moisture and combustible dusts. A twist with an audible click locks the plug in place and energizes the connector. When not in use, a spring cover seals the connector against the environmental elements.
QTY
  • Product Description
  • Features
  • Specifications
U-Line™ ECCL/ECC Factory Sealed 20 Amp Cable Connectors provide an easy way to extend the reach of your power supply to areas where a standard or U-Line™ receptacle may not be available. A gasket in the throat of the cable connector seals around the U-Line plug powering your equipment, protecting against moisture and combustible dusts. A twist with an audible click locks the plug in place and energizes the connector. When not in use, a spring cover seals the connector against the environmental elements.
  • Features
    • Gasketed spring door cover snaps shut to protect against moisture and combustible dust
    • Gasket in receptacle throat seals around plug for protection against environment
    • Interior switch cylinder has neoprene O-ring at each end to seal out dust and moisture
    • 2 bushings to accommodate different cable sizes
  • Specifications
    • Hazardous Area Classification : Class I, Division 1 and 2 Groups B, C, D; Class II, Division 1 and 2, Groups F, G; Class III; NEMA 3, 3R, 7BCD, 9FG
    • Amperage : 20
    • Voltage : 125 Vac or 250 Vac
    • Number of Poles : 3
    • Number of Wires : 2
    • Horsepower Ratings : 1, 2
    • Plug Cable Diameter : .538 – .639
    • Materials and Finishes : Connector housing is copperfree (4/10 of 1% max.) aluminum with epoxy powder coat