3-phase stepper motor - 0.51 Nm - shaft Ø 6.35 mm - L=42 mm - w/o brake - wire

VRDM364/50LHA OOIP41 OO D6O 38

SQDBRS364H030AAA BRS364H030AAA 3606485149301
237.34 / EA
http://schema.org/OutOfStock
Mayer-DDS-3-phase stepper motor - 0.51 Nm - shaft Ø 6.35 mm - L=42 mm - w/o brake - wire-1
  • Length: 42 mm
  • Line Rated Current: 5.2 A
  • Mounting Hole Size: 5.2 mm, 66.6 mm
  • Net Weight: 1.3 kg
  • Number of Holes: 4
  • Number of Poles: 6
  • Resistance: 0.42 ohm
  • Shaft Length: 21 mm
  • Standard: IEC 50347, IEC 60072-1
  • Storage Temperature: -25-70 °C
  • Warranty Length: 18 mth
QTY
  • Specifications
  • Environment
    • Ambient Air Temperature For Operation : -25-40 °C
    • Standards : IEC 60072-1 || IEC 50347
    • Temperature Class : F winding IEC 60034-1
    • Vibration Resistance : 20 m/s² maximum || A IEC 60034-14
    • Ambient Air Temperature For Storage : -25-70 °C
    • Type Of Cooling : natural convection
    • Relative Humidity : 15-85 % without condensation
    • Ip Degree Of Protection : IP56 total except shaft bushing: conforming to IEC 60034-5 || IP41 shaft bushing without shaft seal ring: conforming to IEC 60034-5
    • Operating Altitude : <= 3280.84 ft (1000 m) without power derating
  • Contractual warranty
    • Warranty : 18 months
  • Offer Sustainability
    • Rohs Exemption Information : Yes
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP111101EN
    • Sustainable Offer Status : Green Premium product
    • Pvc Free : Yes
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • China Rohs Regulation : X
    • Circularity Profile : N/A
    • Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
  • Complementary
    • Circle Diameter Of The Mounting Holes : 66.6 mm
    • Maximum Radial Force Fr : 40 N second shaft end) || 24 N first shaft end)
    • Nominal Torque : 0.45 N.m
    • Rotor Inertia : 0.1 kg.cm²
    • Centring Collar Depth : 1.6 mm
    • Holding Brake : without
    • Second Shaft : without second shaft end
    • Shaft Length : 21 mm
    • Net Weight : 1.3 kg
    • Resolution : 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
    • Angular Acceleration : 200000 rad/s²
    • Maximum Starting Frequency : 8.5 kHz
    • Time Constant : 2.1 ms
    • Number Of Mounting Holes : 4
    • Holding Torque : 0.51 N.m
    • Shaft Diameter : 6.35 mm
    • Mounting Holes Diameter : 5.2 mm
    • Service Life In Hours : 20000 h bearing)
    • Resistance : 0.42 Ohm winding)
    • Shaft End : smooth shaft
    • Electrical Connection : flying leads
    • Line Rated Current : 5.2 A
    • Accuracy Error : +/- 6 arc min
    • Maximum Axial Force Fa : 100 N tensile force) || 8.4 N force pressure)
  • Specifications
    • Maximum Mechanical Speed : 3000 rpm
    • Mounting Support : flange
    • Number Of Motor Poles : 6
    • Product Or Component Type : motion control motor
    • Length : 42 mm
    • Centring Collar Diameter : 38 mm
    • Motor Flange Size : 57.2 mm
    • Motor Type : 3-phase stepper motor
    • Supply Voltage Limits : 34-34 V DC || 48-48 V DC
    • Range Compatibility : Lexium SD3
    • Device Short Name : BRS3