SQUARE D

SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, straight, IP65/65

SERVO MOTOR SH3 205 94,4NM,KEY

SQDSH32053P11A1100 SH32053P11A1100 3606481973641
11448.50 / EA
http://schema.org/OutOfStock
Mayer-DDS-SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, straight, IP65/65-1
  • Country of Origin: Germany
  • Shaft Diameter: 38 mm
  • Shaft End: Parallel Key
  • Shaft Length: 80 mm
  • Warranty Length: 18 mth
QTY
  • Features
  • Specifications
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Physical Attributes
    • Key Width : 10 mm
    • Motor Flange Size : 205 mm
    • Shaft Length : 80 mm
  • Complementary Attributes
    • Minimum Ambient Air Temperature For Operation : -20.0 °C, -20.0 °C
    • Line Rated Current : 20.4 A
    • Maximum Ambient Air Temperature For Operation : 60.0 °C
    • Maximum Axial Force Fa : 740 N
    • Maximum Current Irms : 136.1 A
    • Maximum Mechanical Speed : 3800 rpm
    • Maximum Operational Altitude : 3000.0 m
    • Maximum Radial Force Fr : 4500 N 1000 rpm3570 N 2000 rpm3120 N 3000 rpm
    • Minimum Operational Altitude : 0.0 m
    • Us Rated Supply Voltage : 115...480 V
    • Maximum In Rated Current : 20.4 A
  • Important Information Attributes
    • Electrical Connection : straight connector, rotatable right angled connector
    • Nominal Speed : 2000 rpm, 500 rpm 115 V single phase1000 rpm 230 V single phase, 2000 rpm 400 V three phase2400 rpm 480 V three phase
    • Nominal Torque : 84.9 N.m 115 V single phase74.4 N.m 230 V single phase, 50.7 N.m 400 V three phase40.2 N.m 480 V three phase50.7 N.m full speed72.55 N.m half speed
    • Local Data Status : Publishable
    • Local Publishable Date : 2026-01-12
    • Return Indicator : N
    • Device Type : Motion - drive & motor
    • Serviceability : Yes
    • Traceability : Yes
    • Field Service Division : IDIBS
    • Average Life Duration : 15 year(s)
    • Weee Scope : Out
    • Scope Perimeter : At least in Europe
    • Eoli Availability Display : No need of specific recycling operations
    • Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
    • Reach Full Compliance Status Id : CONTAINS_SVHC
    • Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
    • Rohs Eur In Scope : No
    • Rohs Eur Status : Compliant By Exemption
    • Rohs Eur Conformity Date : 1901
    • Rohs Eur Full Compliance Status : Compliant By Exemption
    • China Rohs In Scope : Yes
    • China Rohs Label : 5
    • With Recycled Cardboard : Yes
    • Without Single Use Plastic : No
    • Product Contributes To Saved And Avoided Emissions : No
    • Product Kit Identifier : N
    • Centring Collar Diameter : 180 mm
    • Circle Diameter Of The Mounting Holes : 215 mm
    • Continuous Power : 10600 W
    • Continuous Stall Current : 33.2 A
    • Continuous Stall Torque : 94.4 N.m 115...480 V three phase
    • Derating Altitude Scale : 80.0 m
    • Derating Altitude Start : 1000.0 m
    • Derating Temperature Scale : 80.0 °C
    • Derating Temperature Start : 40.0 °C
    • Device Short Name : SH3
    • Encoder Type : absolute single turn SinCos Hiperface
    • Holding Brake : without
    • Inertia : 0.0 kg.cm² of brake190.0 kg.cm² of motor
    • Motor Figures : 400.0 V
    • Mounting Holes Diameter : 14 mm
    • Mounting Support : international standard flange
    • Network Number Of Phases : 3
    • Number Of Motor Poles : 5
    • Number Of Mounting Holes : 4
    • Peak Nominal Torque : 330.0 N.m
    • Peak Stall Torque : 330 N.m 115...480 V three phase
    • Phase : three phase
    • Product Availability : Non-Stock - Not normally stocked in distribution facility
    • Product Or Component Type : servo motor
    • Returnability : No
    • Rotor Inertia : 190 kg.cm²
    • Shaft Diameter : 38 mm
    • Shaft End : parallel key
    • Sizing Reference : SH32053P
    • Speed Feedback Resolution : 128 periods
    • Stator Inductance : 2.05 mH
    • Stator Resistance : 0.2 Ohm
    • Sustainable Packaging : No
    • Temperature Copper Hot : 130 °C
    • Torque Constant : 2.84 N.m/A 120 °C
    • Type Of Cooling : natural convection
    • Length Total : 489 mm
    • Nbr. Of Units In Pkg. : 1
    • Customs Code : 8501524000
    • Warranty In Months : 18
  • Environment Attributes Main
    • Ip Degree Of Protection : IP65 motor: conforming to IEC 60034-5, IP65 shaft bushing: conforming to IEC 60034-5
    • Take Back : No
    • Recycled Metal Content At Cr Level : 0 %
    • China Rohs Regulation : X
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP111049EN
    • Eu Rohs Directive : Compliant By Exemption
    • Packaging Made With Recycled Cardboard : Yes
    • Packaging Without Single Use Plastic : No
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • Pep Code : ENVPEP111049EN
  • General Attributes
    • Phase : three phase
    • Product Or Component Type : servo motor
  • ETIM
    • ETIM 8 : EC001851
    • ETIM 9 : EC001851
    • ETIM 10 : EC001851
  • Output Attributes
    • Nominal Output Power : 4450 W 115 V single phase7790 W 230 V single phase, 10620 W 400 V three phase10100 W 480 V three phase
    • Output Current 3s Peak : 136.1 A
  • Contractual Warranty Attributes
    • Warranty : 18 months
  • Specifications
    • Country of Origin : Germany