servo motor SH3 205 64,9Nm,key,single,nobrake,str.conn,IP65/IP67,3.8k RPM

SERVO MOTOR SH3 205 64,9NM,KEY

SQDSH32052P11A1200 SH32052P11A1200 SQDSH32052P11A1200
0.00 / EA
http://schema.org/OutOfStock
Mayer-DDS-servo motor SH3 205 64,9Nm,key,single,nobrake,str.conn,IP65/IP67,3.8k RPM-1
  • Length: 405 mm
  • Mounting Hole Size: 14 mm, 215 mm
  • Net Weight: 50 kg
  • Number of Holes: 4
  • Number of Phases: 3
  • Number of Poles: 5
  • Shaft Length: 80 mm
  • Warranty Length: 18 mth
  • Width: 10 mm
QTY
  • Specifications
  • Complementary
    • Circle Diameter Of The Mounting Holes : 215 mm
    • Peak Stall Torque : 220 N.m 115...480 V three phase
    • Number Of Mounting Holes : 4
    • Continuous Power : 7900 W
    • Shaft Diameter : 38 mm
    • Key Width : 10 mm
    • Nominal Output Power : 3230 W 115 V single phase || 5860 W 230 V single phase || 7980 W 400 V three phase || 7140 W 480 V three phase
    • Maximum Mechanical Speed : 3800 rpm
    • Mounting Holes Diameter : 14 mm
    • Type Of Cooling : natural convection
    • Maximum Radial Force Fr : 4200 N 1000 rpm || 3330 N 2000 rpm || 2910 N 3000 rpm
    • Encoder Type : absolute single turn SinCos Hiperface
    • Mounting Support : international standard flange
    • Rotor Inertia : 129 kg.cm²
    • Number Of Motor Poles : 5
    • Back Emf Constant : 161 V/krpm 20 °C
    • Maximum Axial Force Fa : 740 N
    • Ip Degree Of Protection : IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5
    • Shaft End : parallel key
    • Centring Collar Depth : 4 mm
    • Nominal Speed : 500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
    • Electrical Connection : straight connector
    • Holding Brake : without
    • Speed Feedback Resolution : 128 periods
    • Stator Resistance : 0.3 Ohm
    • Continuous Stall Current : 25.7 A
    • Nominal Torque : 61.6 N.m 115 V single phase || 56 N.m 230 V single phase || 38.1 N.m 400 V three phase || 28.4 N.m 480 V three phase
    • Shaft Length : 80 mm
    • Phase : three phase
    • Length : 405 mm
    • Net Weight : 50 kg
    • Maximum Current Irms : 96.8 A
    • Torque Constant : 2.58 N.m/A 120 °C
    • Centring Collar Diameter : 180 mm
    • Continuous Stall Torque : 64.9 N.m 115...480 V three phase
    • Stator Inductance : 8.2 mH
    • Motor Flange Size : 205 mm
    • [Us] Rated Supply Voltage : 115...480 V
  • Offer Sustainability
    • China Rohs Regulation : X
    • Circularity Profile : N/A
    • Rohs Exemption Information : Yes
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP111049EN
    • Sustainable Offer Status : Green Premium product
    • Pvc Free : Yes
    • Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
  • Specifications
    • Length : 405 mm
    • Width : 10 mm
    • Weight : 50 kg
    • Range Compatibility : PacDrive 3
    • Product Or Component Type : servo motor
    • Device Short Name : SH3.....P
  • Contractual warranty
    • Warranty : 18 months