servo motor BMI 3-phase - keyed IP54 single turn - 32768 p/t

MOT 3P 70MM IP54 860W KEY ENC

SQDBMI0703P16A BMI0703P16A 3606485376400
1929.64 / EA
http://schema.org/OutOfStock
Mayer-DDS-servo motor BMI 3-phase - keyed IP54 single turn - 32768 p/t-1
  • Country of Origin: Germany
  • Length: 300 mm
  • Shaft Diameter: 14 mm
  • Shaft End: Keyed
  • Shaft Length: 30 mm
  • Warranty Length: 18 mth
  • Width: 5 mm
This product is part of the Lexium 32i range, an offer integrated servo drive from 0.6kW to 2.2kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 8000RPM and keyed shaft without holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. BMI servo motor has a medium inertia motor, which means it is particularly suitable for medium and high-load applications. It helps to simplify installation and adjustment through a more robust adjustment of the movement. It is a servo motor with a rated supply voltage of 208V to 480V and a continuous output current of 2A at 8kHz. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with printed circuit board connector for electrical connection. It is an IP54 (shaft) and IP65 (housing) rated product. Its dimensions are 300mm (Length) x 70mm (Width) and centring collar dimensions are 2.5mm (Depth) x 60mm (Diameter) with 75mm to 82mm circle diameter of the mounting hole. It is suitable for applications involving high-precision, dynamic positioning such as material handling, material working, packaging and printing. This product is compatible with drive control unit LXM32i CANopen and drive control unit LXM32i EtherCAT. It supports international standard 70mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the control unit, which provides automatic motor identification when the Lexium 32i starts. Lexium BMI servo motor provides high power density values to optimize machine compactness. BMI servo motor has a medium inertia motor, which means they are particularly suitable for medium and high-load applications.
QTY
  • Product Description
  • Features
  • Specifications
This product is part of the Lexium 32i range, an offer integrated servo drive from 0.6kW to 2.2kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 8000RPM and keyed shaft without holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. BMI servo motor has a medium inertia motor, which means it is particularly suitable for medium and high-load applications. It helps to simplify installation and adjustment through a more robust adjustment of the movement. It is a servo motor with a rated supply voltage of 208V to 480V and a continuous output current of 2A at 8kHz. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with printed circuit board connector for electrical connection. It is an IP54 (shaft) and IP65 (housing) rated product. Its dimensions are 300mm (Length) x 70mm (Width) and centring collar dimensions are 2.5mm (Depth) x 60mm (Diameter) with 75mm to 82mm circle diameter of the mounting hole. It is suitable for applications involving high-precision, dynamic positioning such as material handling, material working, packaging and printing. This product is compatible with drive control unit LXM32i CANopen and drive control unit LXM32i EtherCAT. It supports international standard 70mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the control unit, which provides automatic motor identification when the Lexium 32i starts. Lexium BMI servo motor provides high power density values to optimize machine compactness. BMI servo motor has a medium inertia motor, which means they are particularly suitable for medium and high-load applications.
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Environment
    • Ip Degree Of Protection : shaft IP54 || housing IP65
  • Contractual warranty
    • Warranty : 18 months
  • Environmental data
    • Rohs Exemption Information : Yes
    • Packaging Made With Recycled Cardboard : Yes
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP1312017EN
    • Packaging Without Single Use Plastic : No
    • Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Circularity Profile : ENVEOLI1312017EN
    • Take-Back : No
    • Pvc Free : Yes
    • Sustainable Packaging : No
    • Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
  • Complementary
    • Maximum Mechanical Speed : 8000 rpm
    • Output Current 3S Peak : 6 A 400 V 3 s
    • Stator Electrical Time Constant : 3.2 ms 20 °C
    • Circle Diameter Of The Mounting Holes : 75-82 mm
    • Maximum Radial Force Fr : 730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    • Mounting Support : international standard flange
    • Number Of Motor Stacks : 3
    • Rotor Inertia : 1.67 kg.cm²
    • Number Of Motor Poles : 10
    • Back Emf Constant : 95.39 V/krpm 20 °C
    • Maximum Axial Force Fa : 0.2 x Fr
    • Centring Collar Depth : 2.5 mm
    • Holding Brake : without
    • Speed Feedback Resolution : 32768 points/turn
    • Second Shaft : without second shaft end
    • Product Compatibility : drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
    • Network Frequency Limits : 47.5-63 Hz
    • Shaft Length : 30 mm
    • Phase : three phase
    • Maximum Current Irms : 12.5 A 400 V, three phase || 12.5 A 480 V, three phase || 12.5 A 208 V, three phase
    • Length : 300 mm
    • Centring Collar Diameter : 60 mm
    • Stator Inductance : 25.6 mH 20 °C
    • Motor Flange Size : 70 mm
    • Peak Stall Torque : 8.6 N.m 208 V three phase || 8.6 N.m 400 V three phase || 8.6 N.m 480 V three phase
    • Number Of Mounting Holes : 4
    • Distance Shaft Shoulder-Flange : 2.5 mm
    • Shaft Diameter : 14 mm
    • Key Width : 5 mm
    • Nominal Output Power : 900 W 400 V three phase || 900 W 480 V three phase || 450 W 208 V three phase
    • [Us] Rated Supply Voltage : 208...480 V - 15...10 %
    • Supply Voltage Limits : 208-480 V
    • Mounting Holes Diameter : 5.5 mm
    • Type Of Cooling : natural convection
    • Shaft End : keyed
    • Nominal Speed : 3300 rpm 400 V three phase || 1600 rpm 208 V three phase || 3900 rpm 480 V three phase
    • Electrical Connection : printed circuit board connector
    • Feedback Type : absolute single turn SinCos Hiperface
    • Stator Resistance : 7.99 Ohm 20 °C
    • Emc Filter : integrated
    • Continuous Stall Current : 2 A
    • Nominal Torque : 2.9 N.m 208 V three phase || 2.7 N.m 400 V three phase || 2.3 N.m 480 V three phase
    • Continuous Output Current : 2 A 8 kHz
    • Torque Constant : 1.41 N.m/A 20 °C
    • Supply Frequency : 50/60 Hz - 5...5 %
    • Continuous Stall Torque : 3.4 N.m 208...480 V three phase
  • Specifications
    • Country of Origin : Germany
    • Length : 300 mm
    • Width : 5 mm
    • Product Or Component Type : servo motor with power stage
    • Range Compatibility : Lexium 32i
    • Device Short Name : BMI