integrated drive ILS with stepper motor - 24..36 V - pulse/direction 24 V - 5 A

Intg. stepper, 24-36V, P/D"

SQDILS1U853PB1A0 ILS1U853PB1A0 3389119227667
1444.80 / EA
http://schema.org/OutOfStock
Mayer-DDS-integrated drive ILS with stepper motor - 24..36 V - pulse/direction 24 V - 5 A-1
  • Country of Origin: Germany
  • Length: 200.6 mm
  • Motor Type: 3-phase Stepper Motor
  • Net Weight: 4.7 kg
  • Shaft Diameter: 14 mm
  • Shaft End: Untapped
  • Shaft Length: 30 mm
  • Warranty Length: 18 mth
  • Weight: 4.7 kg
This product is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control. This is an integrated drive with a stepper motor, without gearbox, without holding brake. The feedback is given by an index pulse. Its nominal speed is 60rpm at 24VDC, 120rpm at 36VDC. Its nominal torque is 6.0Nm. It embeds 4 signals which can be used as input or output. This integrated drive consists of control electronics with a 24V pulse/direction, and a 3-phase stepper motor. Its stepper capacity is 200steps per 1.8degrees, 400 per 0.9, 500 per 0.72, 1000 per 0.36, 2000 per 0.18, 4000 per 0.09, 5000 per 0.072, and 10000 per 0.036. The electrical connection is made on a printed circuit board connector. Its motor flange size is 85mm. It installs with 4x 6.5mm mounting holes. The circle diameter of the mounting holes is 99mm. It weighs 4.7kg. It integrates a 24V pulse/direction interface. This product is certified by cUL, TÜV and UL. It is compatible with pre-assembled cables for 24V pulse/direction interface. Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up. Lexium-integrated drives are used to create decentralized motion control solutions in very compact units. integrated Drives for motion control with stepper, servo or brushless DC motor.
QTY
  • Product Description
  • Features
  • Specifications
This product is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control. This is an integrated drive with a stepper motor, without gearbox, without holding brake. The feedback is given by an index pulse. Its nominal speed is 60rpm at 24VDC, 120rpm at 36VDC. Its nominal torque is 6.0Nm. It embeds 4 signals which can be used as input or output. This integrated drive consists of control electronics with a 24V pulse/direction, and a 3-phase stepper motor. Its stepper capacity is 200steps per 1.8degrees, 400 per 0.9, 500 per 0.72, 1000 per 0.36, 2000 per 0.18, 4000 per 0.09, 5000 per 0.072, and 10000 per 0.036. The electrical connection is made on a printed circuit board connector. Its motor flange size is 85mm. It installs with 4x 6.5mm mounting holes. The circle diameter of the mounting holes is 99mm. It weighs 4.7kg. It integrates a 24V pulse/direction interface. This product is certified by cUL, TÜV and UL. It is compatible with pre-assembled cables for 24V pulse/direction interface. Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up. Lexium-integrated drives are used to create decentralized motion control solutions in very compact units. integrated Drives for motion control with stepper, servo or brushless DC motor.
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Environment
    • Product Certifications : UL || cUL || TÜV
    • Standards : IEC 61800-3 || EN 61800-3:2001, second environment || IEC 60072-1 || IEC 50347 || EN 61800-3 : 2001-02 || IEC 50178 || IEC 61800-3, Ed 2
    • Ambient Air Temperature For Operation : 50-65 °C (with power derating of 2 % per °C) || 0-50 °C (without derating)
    • Shock Resistance : 150 m/s² 1000 shocks IEC 60068-2-29
    • Vibration Resistance : 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
    • Permissible Ambient Air Temperature Around The Device : 105 °C power amplifier || 110 °C motor
    • Ambient Air Temperature For Storage : -25-70 °C
    • Relative Humidity : 15-85 % without condensation
    • Ip Degree Of Protection : IP41 shaft bushing: conforming to IEC 60034-5 || IP54 total except shaft bushing: conforming to IEC 60034-5
    • Operating Altitude : <= 3280.84 ft (1000 m) without derating
  • Contractual warranty
    • Warranty : 18 months
  • Environmental data
    • Rohs Exemption Information : Yes
    • Packaging Made With Recycled Cardboard : Yes
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP1411002EN
    • Packaging Without Single Use Plastic : No
    • Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Scip Number : f800009a-26ea-46d4-b613-164e8055f98f
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Circularity Profile : ENVEOLI1411002EN
    • Take-Back : No
    • Carbon Footprint Of The Use Phase [B2, B3, B4, B6] : 387.1300578035
    • Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 31.9766388102
    • Carbon Footprint Of The Distribution Phase [A4] : 0.7 kg CO2 eq.
    • Pvc Free : Yes
    • Carbon Footprint Of The Installation Phase [A5] : 0 kg CO2 eq.
    • Sustainable Packaging : No
    • Total Lifecycle Carbon Footprint : 421 kg CO2 eq.
    • Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
    • Carbon Footprint Of The End-Of-Life Phase [C1 To C4] : 0.6225054008
    • Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 420.5136079386
  • Complementary
    • Circle Diameter Of The Mounting Holes : 99 mm
    • Current Consumption : 5000 mA maximum continuous
    • Maximum Mechanical Speed : 1000 rpm
    • Maximum Switching Current : 100 mA per output || 200 mA total
    • Maximum Radial Force Fr : 110 N
    • Mounting Support : flange
    • Number Of Motor Stacks : 3
    • Rotor Inertia : 3.3 kg.cm²
    • Continuous Stall Torque : 6 N.m
    • Centring Collar Depth : 2 mm
    • Discrete Input Current : 10-10 mA at 24 V safety input
    • Second Shaft : without second shaft end
    • Marking : CE
    • Shaft Length : 30 mm
    • Net Weight : 4.7 kg
    • Voltage State 0 Guaranteed : -3...4.5 V
    • Centring Collar Diameter : 60 mm
    • Motor Flange Size : 85 mm
    • Peak Stall Torque : 6 N.m
    • Number Of Mounting Holes : 4
    • Shaft Diameter : 14 mm
    • Discrete Output Voltage : 23...25 V
    • Supply Voltage Limits : 18-40 V
    • Mounting Holes Diameter : 6.5 mm
    • Speed Feedback Resolution : 1.8°, 0.9°, 0.72°, 0.36°, 0.18°, 0.09°, 0.072°, 0.036° || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps
    • Type Of Cooling : natural convection
    • Service Life In Hours : 20000 h bearing
    • Shaft End : untapped
    • Feedback Type : index pulse
    • Protection Type : short circuit of the output voltage || overload of output voltage || safe torque off
    • Accuracy Error : +/- 6 arc min
    • Input/Output Type : 4 signals (each be used as input or output)
    • Maximum Axial Force Fa : 170 N tensile force) || 30 N force pressure)
    • Associated Fuse Rating : 10 A
    • Voltage State 1 Guaranteed : 15...30 V
  • Specifications
    • Country of Origin : Germany
    • Weight : 4.7 kg
    • Range Of Product : Lexium integrated drive
    • Holding Torque : 6 N.m
    • Network Type : DC
    • Winding Type : medium speed of rotation and medium torque
    • Number Of Motor Poles : 6
    • Holding Brake : without
    • Product Or Component Type : motion integrated drive
    • Phase : single phase
    • Length : 200.6 mm
    • [Us] Rated Supply Voltage : 36 V || 24 V
    • Communication Interface : pulse/direction 24 V, Integrated
    • Gear Box Type : without
    • Motor Type : 3-phase stepper motor
    • Nominal Speed : 120 rpm 36 V || 60 rpm 24 V
    • Electrical Connection : printed circuit board connector
    • Nominal Torque : 6 N.m
    • Device Short Name : ILS