This product is part of the Lexium SD3 range, an offer of 3phase stepper drives and stepper motors. This is a 3phase stepper motor that features a maximum mechanical speed of 3000RPM, a smooth shaft end (diameter 6.35mm), without holding brake. It has one angled connector for electrical wiring. It carries out precise step-by-step movements that are predefined by a stepper motor drive. Its stepper capacity is 200 steps per 1.8 degrees, 400 per 0.9, 500 per 0.72, 1000 per 0.36, 2000 per 0.18, 4000 per 0.09, 5000 per 0.072, and 10000 per 0.036. Its supply voltage is 34VDC to 48VDC, rated current is 5.8A, nominal torque is 0.9Nm, time constant is 3.3ms, degree of protection is IP56, shaft end is IP41. The motor flange size is 57.2mm, fixed by 4x 5.2mm holes. The circle diameter of the mounting holes is 66.6mm. It weighs 1.6kg. This stepper motor is designed for Lexium SD3 drives. This product is certified by CE, CUL, and UL. It meets EN/IEC 50178, EN/IEC 61800-5-1, EN/IEC 61800-3 environment 1/2, and EN/IEC 61800-3 standards. It is compatible with SD315 stepper motor drives. Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up. The SD3 is an universally applicable stepper motor drive. Stepper drives and stepper motors are for motion control with high accuracy and high torque at low rotation speeds.

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environment
• Ambient Air Temperature For Operation : -25-40 °C
• Standards : IEC 50347 || IEC 60072-1
• Temperature Class : F winding IEC 60034-1
• Vibration Resistance : 20 m/s² maximum || A IEC 60034-14
• Ambient Air Temperature For Storage : -25-70 °C
• Type Of Cooling : natural convection
• Relative Humidity : 15-85 % without condensation
• Ip Degree Of Protection : IP56 total except shaft bushing: conforming to IEC 60034-5 || IP41 shaft bushing without shaft seal ring: conforming to IEC 60034-5
• Operating Altitude : <= 3280.84 ft (1000 m) without power derating
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP111101EN
• Packaging Without Single Use Plastic : No
• Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : N/A
• Take-Back : No
• Carbon Footprint Of The Use Phase [B2, B3, B4, B6] : 597.6245336836
• Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 5.8587833997
• Carbon Footprint Of The Distribution Phase [A4] : 0.2 kg CO2 eq.
• Pvc Free : Yes
• Carbon Footprint Of The Installation Phase [A5] : 0 kg CO2 eq.
• Sustainable Packaging : No
• Total Lifecycle Carbon Footprint : 604 kg CO2 eq.
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Carbon Footprint Of The End-Of-Life Phase [C1 To C4] : 0.1528989956
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 603.8426515536
• Complementary
• Circle Diameter Of The Mounting Holes : 66.6 mm
• Maximum Radial Force Fr : 40 N second shaft end) || 24 N first shaft end)
• Nominal Torque : 0.9 N.m
• Rotor Inertia : 0.22 kg.cm²
• Centring Collar Depth : 1.6 mm
• Holding Brake : without
• Second Shaft : without second shaft end
• Shaft Length : 21 mm
• Net Weight : 1.6 kg
• Resolution : 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
• Angular Acceleration : 200000 rad/s²
• Maximum Starting Frequency : 8 kHz
• Time Constant : 3.3 ms
• Number Of Mounting Holes : 4
• Holding Torque : 1.02 N.m
• Shaft Diameter : 6.35 mm
• Mounting Holes Diameter : 5.2 mm
• Service Life In Hours : 20000 h bearing)
• Resistance : 0.5 Ohm winding)
• Shaft End : smooth shaft
• Electrical Connection : flying leads
• Line Rated Current : 5.8 A
• Accuracy Error : +/- 6 arc min
• Maximum Axial Force Fa : 100 N tensile force) || 8.4 N force pressure)
• Specifications
• Country of Origin : Germany
• Weight : 1.6 kg
• Maximum Mechanical Speed : 3000 rpm
• Mounting Support : flange
• Number Of Motor Poles : 6
• Product Or Component Type : motion control motor
• Length : 56 mm
• Centring Collar Diameter : 38 mm
• Motor Flange Size : 57.2 mm
• Motor Type : 3-phase stepper motor
• Supply Voltage Limits : 34-34 V DC || 48-48 V DC
• Range Compatibility : Lexium SD3
• Device Short Name : BRS3