This product belongs to the range Lexium SD3 & Motors 3-phase stepper drives and stepper motors. It is a 3-phase stepper motor with 0.51Nm holding torque. Its shaft diameter is 6.35mm, and its shaft length is 21mm. This 3-phase stepper motor carries out precise step by step movements that are predefined by a stepper motor drive such as Lexium SD2 drives. The maximum mechanical speed of this 3-phase stepper motor is 3000rpm, it has no brake. Its electrical connection is made on Flying leads. It measures 79mm long, its flange size is 57.2mm square diameter. It weighs 1.3kg. This BRS stepper motor is designed for Lexium SD3 stepper motor drives and suitable for short-distance positioning, such as labelling. It is compliant with IEC 60072-1 and EN 50347 standards. This motor is designed to be compatible with Lexium SD3 stepper motor drives and optionnal Encoders or planetary gearboxes. It installs on 4x holes (5.2mm diameter), the squarediameter of the mounting holes is 47.2mm. Lexium SD3 & BRS3, Three-phase range up to 19.7Nm with high accuracy and high torque at low rotation speeds. The SD3 is a universally applicable stepper motor drive. Connect the stepper motor to the drive, set the current and step resolution, it is ready.

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environment
• Ambient Air Temperature For Operation : -25-40 °C
• Standards : IEC 60072-1 || IEC 50347
• Temperature Class : F winding IEC 60034-1
• Vibration Resistance : 20 m/s² maximum || A IEC 60034-14
• Ambient Air Temperature For Storage : -25-70 °C
• Type Of Cooling : natural convection
• Relative Humidity : 15-85 % without condensation
• Ip Degree Of Protection : IP56 total except shaft bushing: conforming to IEC 60034-5 || IP41 shaft bushing without shaft seal ring: conforming to IEC 60034-5
• Operating Altitude : <= 3280.84 ft (1000 m) without power derating
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP111101EN
• Packaging Without Single Use Plastic : No
• Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : N/A
• Take-Back : No
• Carbon Footprint Of The Use Phase [B2, B3, B4, B6] : 597.6245336836
• Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 4.7602615122
• Carbon Footprint Of The Distribution Phase [A4] : 0.2 kg CO2 eq.
• Pvc Free : Yes
• Carbon Footprint Of The Installation Phase [A5] : 0 kg CO2 eq.
• Sustainable Packaging : No
• Total Lifecycle Carbon Footprint : 603 kg CO2 eq.
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Carbon Footprint Of The End-Of-Life Phase [C1 To C4] : 0.124230434
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 602.676754453
• Complementary
• Circle Diameter Of The Mounting Holes : 66.6 mm
• Maximum Radial Force Fr : 40 N second shaft end) || 24 N first shaft end)
• Nominal Torque : 0.45 N.m
• Rotor Inertia : 0.1 kg.cm²
• Centring Collar Depth : 1.6 mm
• Holding Brake : without
• Second Shaft : without second shaft end
• Shaft Length : 21 mm
• Net Weight : 1.3 kg
• Resolution : 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
• Angular Acceleration : 200000 rad/s²
• Maximum Starting Frequency : 8.5 kHz
• Time Constant : 2.1 ms
• Number Of Mounting Holes : 4
• Holding Torque : 0.51 N.m
• Shaft Diameter : 6.35 mm
• Mounting Holes Diameter : 5.2 mm
• Service Life In Hours : 20000 h bearing)
• Resistance : 0.42 Ohm winding)
• Shaft End : smooth shaft
• Electrical Connection : flying leads
• Line Rated Current : 5.2 A
• Accuracy Error : +/- 6 arc min
• Maximum Axial Force Fa : 100 N tensile force) || 8.4 N force pressure)
• Specifications
• Country of Origin : Germany
• Weight : 1.3 kg
• Maximum Mechanical Speed : 3000 rpm
• Mounting Support : flange
• Number Of Motor Poles : 6
• Product Or Component Type : motion control motor
• Length : 42 mm
• Centring Collar Diameter : 38 mm
• Motor Flange Size : 57.2 mm
• Motor Type : 3-phase stepper motor
• Supply Voltage Limits : 34-34 V DC || 48-48 V DC
• Range Compatibility : Lexium SD3
• Device Short Name : BRS3