This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 12A, nominal power of 2kW and continuous power of 2000W. It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control. It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 62mm (width) x 184mm (depth) x 170mm (height). It weighs 1.7kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 4 motor stacks) at 2000W and servo motor (100mm, 2 motor stacks) at 2000W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Complementary
• [Us] Rated Supply Voltage : 200...240 V - 10...15 %)three phase || 200...240 V - 20...15 %)single phase
• Network Frequency : 47.5...63 Hz
• Type Of Cable : shielded motor cable 0-55 °C) copper
• Discrete Input Logic : positive or negative CN1)
• Continuous Output Current 2 : 12 A
• Continuous Output Current 3 : 12 A
• Height : 170 mm
• Output Current 3S Peak : 36 A 220 V
• Electrical Isolation : between power and control
• Physical Interface : RS485 Modbus Serial line slave
• Product Compatibility : servo motor BCH2 130 mm, 4 2000 W || servo motor 100 mm, 2 2000 W || servo motor 180 mm, 1 2000 W
• Status Led : 1 LED (Red) DC bus energized || 1 LED (multi-colour) N.RUN || 1 LED (multi-colour) N.ERR || 2 LEDs (Yellow) Link (Link Status) || 2 LEDs (Yellow) activity
• Discrete Output Number : 5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
• Discrete Input Voltage : 24 V DC logic
• Transmission Rate : 100 Mbit/s EtherCAT
• Discrete Output Voltage : 12...24 V DC
• Discrete Input Number : 8 programmable CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
• Signalling Function : servo status and fault codes five 7-segment display units
• Marking : cULus || CE || CSA
• Output Current 3S Peak 2 : 36 A 220 V
• Connector Type : RJ45 CN4)EtherCAT
• Phase : three phase
• Net Weight : 1.7 kg
• Output Current 3S Peak 3 : 36 A 220 V
• Communication Interface : EtherCAT, Integrated
• Electrical Connection : spring terminal 3.3...4 mm², AWG 12 L1-L2) || spring terminal 3.3...4 mm², AWG 12 R, S, T) || spring terminal 3.3...4 mm², AWG 12 U, V, W, PE) || spring terminal 3.3...4 mm², AWG 12 PA/+, PBe)
• Switching Frequency : 8 kHz
• Supply Voltage Description : three phase 220 V AC 50...60 Hz
• Discrete Output Logic : positive or negative CN1)
• Type Of Cooling : natural convection
• Communication Iinterface : EtherCAT || pulse train output
• Emc Filter Compatibility : type 022 || type 020
• Supply Voltage Limits : 200-255 V three phase || 170-255 V single phase
• Method Of Access : slave
• Control Signal Type : servo motor encoder feedback CN2
• Field Weakening : false
• Safety Function : STO (safe torque off), Integrated
• Output Voltage : <= power supply voltage
• Operating Position : vertical
• Emc Filter : without EMC filter
• Maximum Leakage Current : 1.35 mA
• Width : 62 mm
• Overvoltage Category : III
• Depth : 184 mm
• Nominal Power : 2 kW 220 V 8 kHz
• Continuous Output Current : 12 A 8 kHz
• Switching Frequency 2 : 8 kHz
• Protection Type : against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
• Switching Frequency 3 : 8 kHz
• Network Number Of Phases : 3
• Continuous Power : 2000 W 220 V
• Drive Voltage Drop Coefficient : 1
• Supply Frequency : 50/60 Hz - 5...5 %
• Safety Level : SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
• Environmental data
• Packaging Made With Recycled Cardboard : No
• Environmental Disclosure : ENVPEP1409001EN
• Packaging Without Single Use Plastic : No
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Minimum Percentage Of Recycled Plastic Content : 0
• Circularity Profile : ENVEOLI1409001EN
• Take-Back : No
• Pvc Free : Yes
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 4481.8001944804
• Specifications
• Country of Origin : China
• Width : 62 mm
• Height : 170 mm
• Weight : 1.7 kg
• Line Current : 8.7 A 137.1 % 220 V, three phase
• Range Of Product : Lexium 28
• Format Of The Drive : compact housing
• Product Or Component Type : motion servo drive
• Device Short Name : LXM28E
• Environment
• Product Certifications : cULus || CSA || CE
• Ambient Air Temperature For Operation : 0-55 °C
• Standards : IEC 61800-5-1
• Electromagnetic Compatibility : conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
• Vibration Resistance : 3M4 3 mm 9-200 Hz)IEC 60721-3-3
• Shock Resistance : 10 gn, type I IEC 60721-3-3
• Ambient Air Temperature For Storage : -25-65 °C
• Relative Humidity : 5-95 % without condensation
• Ip Degree Of Protection : IP20
• Operating Altitude : <= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m