integrated drive ILA with servo motor - 24..36 V - CANopen - indus connector

Intg. servo CAN. 24-36V single

SQDILA1F571TC1F0 ILA1F571TC1F0 3389119225489
2544.12 / EA
http://schema.org/OutOfStock
  • Country of Origin: Germany
  • Length: 190.8 mm
  • Motor Type: AC Synchronous Servo Motor
  • Net Weight: 1.4 kg
  • Shaft Diameter: 9 mm
  • Shaft End: Untapped
  • Shaft Length: 20 mm
  • Warranty Length: 18 mth
  • Weight: 1.4 kg
This product is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control. This is an integrated drive with an AC synchronous servo motor without gearbox, with holding brake. The feedback is given by a single-turn encoder. Its nominal speed is 5100rpm at 24VDC, 7500rpm at 36VDC. Its nominal torque is 0.26Nm. It embeds 4 signals which canbe used as input or output. This integrated drive consists of control electronics with a communication interface for CANopen DS301 bus, and an AC synchronous servo motor. Its transmission rates are 50, 100, 125, 250, 500, 800 and 1000kbauds. The electrical connection is made on an industrial connector. Its motor flange size is 57mm. It installs with 4x 5.2mm mounting holes. The circle diameter of the mounting holes is 66.6mm. It weighs 1.4kg. It integrates a CANopen DS301 interface. This product is certified by cUL, TÜV and UL. It is compatible with pre-assembled cables for CANopen interface and power supply. Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up. Lexium-integrated drives are used to create decentralized motion control solutions in very compact units. integrated Drives for motion control with stepper, servo or brushless DC motor.
QTY
  • Product Description
  • Features
  • Specifications
This product is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control. This is an integrated drive with an AC synchronous servo motor without gearbox, with holding brake. The feedback is given by a single-turn encoder. Its nominal speed is 5100rpm at 24VDC, 7500rpm at 36VDC. Its nominal torque is 0.26Nm. It embeds 4 signals which canbe used as input or output. This integrated drive consists of control electronics with a communication interface for CANopen DS301 bus, and an AC synchronous servo motor. Its transmission rates are 50, 100, 125, 250, 500, 800 and 1000kbauds. The electrical connection is made on an industrial connector. Its motor flange size is 57mm. It installs with 4x 5.2mm mounting holes. The circle diameter of the mounting holes is 66.6mm. It weighs 1.4kg. It integrates a CANopen DS301 interface. This product is certified by cUL, TÜV and UL. It is compatible with pre-assembled cables for CANopen interface and power supply. Those mounting positions are allowed per IEC 60034-7 as IM B5 shaft horizontal, IM V1 shaft vertical, shaft end down, IM V3 shaft vertical, shaft end up. Lexium-integrated drives are used to create decentralized motion control solutions in very compact units. integrated Drives for motion control with stepper, servo or brushless DC motor.
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Environment
    • Product Certifications : UL || cUL || TÜV
    • Standards : IEC 60072-1 || EN 61800-3 : 2001-02 || IEC 61800-3 || EN 61800-3:2001, second environment || IEC 61800-3, Ed 2 || IEC 50178 || IEC 50347
    • Ambient Air Temperature For Operation : 50-65 °C (with power derating of 2 % per °C) || 0-50 °C (without derating)
    • Shock Resistance : 150 m/s² 1000 shocks IEC 60068-2-29
    • Vibration Resistance : 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
    • Permissible Ambient Air Temperature Around The Device : 105 °C power amplifier || 110 °C motor
    • Ambient Air Temperature For Storage : -25-70 °C
    • Relative Humidity : 15-85 % without condensation
    • Ip Degree Of Protection : IP41 shaft bushing: conforming to IEC 60034-5 || IP54 total except shaft bushing: conforming to IEC 60034-5
    • Operating Altitude : <= 3280.84 ft (1000 m) without derating
  • Contractual warranty
    • Warranty : 18 months
  • Environmental data
    • Rohs Exemption Information : Yes
    • Packaging Made With Recycled Cardboard : Yes
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP2011004EN
    • Packaging Without Single Use Plastic : No
    • Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Circularity Profile : ENVEOLI2011004EN
    • Take-Back : No
    • Carbon Footprint Of The Use Phase [B2, B3, B4, B6] : 518.4625343511
    • Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 27.0743478261
    • Carbon Footprint Of The Distribution Phase [A4] : 0.4 kg CO2 eq.
    • Pvc Free : Yes
    • Carbon Footprint Of The Installation Phase [A5] : 0 kg CO2 eq.
    • Sustainable Packaging : No
    • Total Lifecycle Carbon Footprint : 546 kg CO2 eq.
    • Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
    • Carbon Footprint Of The End-Of-Life Phase [C1 To C4] : 0.4277469565
    • Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 546.4093371338
  • Complementary
    • Circle Diameter Of The Mounting Holes : 66.6 mm
    • Current Consumption : 11000 mA peak || 7500 mA maximum continuous
    • Maximum Switching Current : 100 mA per output || 200 mA total
    • Maximum Radial Force Fr : 89 N
    • Mounting Support : flange
    • Number Of Motor Stacks : 1
    • Rotor Inertia : 0.17 kg.cm²
    • Continuous Stall Torque : 0.26 N.m
    • Centring Collar Depth : 1.6 mm
    • Discrete Input Current : 10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
    • Second Shaft : without second shaft end
    • Marking : CE
    • Shaft Length : 20 mm
    • Brake Pull-In Power : 10 W
    • Net Weight : 1.4 kg
    • Voltage State 0 Guaranteed : -3...4.5 V
    • Centring Collar Diameter : 50 mm
    • Motor Flange Size : 57 mm
    • Brake Release Time : 14 ms
    • Peak Stall Torque : 0.43 N.m
    • Number Of Mounting Holes : 4
    • Shaft Diameter : 9 mm
    • Discrete Output Voltage : 23...25 V
    • Supply Voltage Limits : 18-40 V
    • Mounting Holes Diameter : 5.2 mm
    • Speed Feedback Resolution : 16384 points/turn x 4096 turns
    • Type Of Cooling : natural convection
    • Service Life In Hours : 20000 h bearing
    • Shaft End : untapped
    • Feedback Type : single turn encoder
    • Protection Type : overload of output voltage || safe torque off || short circuit of the output voltage
    • Transmission Rate : 50, 100, 125, 250, 500, 800 and 1000 kbauds
    • Accuracy Error : +/- 0.05 °
    • Brake Application Time : 13 ms
    • Input/Output Type : 4 signals (each be used as input or output)
    • Maximum Axial Force Fa : 104 N force pressure) || 104 N tensile force)
    • Associated Fuse Rating : 10 A
    • Voltage State 1 Guaranteed : 15...30 V
  • Specifications
    • Country of Origin : Germany
    • Weight : 1.4 kg
    • Range Of Product : Lexium integrated drive
    • Holding Torque : 1.2 N.m holding brake
    • Network Type : DC
    • Winding Type : high speed of rotation and medium torque
    • Number Of Motor Poles : 6
    • Holding Brake : with
    • Product Or Component Type : motion integrated drive
    • Phase : single phase
    • Length : 190.8 mm
    • [Us] Rated Supply Voltage : 36 V || 24 V
    • Communication Interface : CANopen DS301, Integrated
    • Gear Box Type : without
    • Motor Type : AC Synchronous Servo Motor
    • Nominal Speed : 5100 rpm 24 V || 7500 rpm 36 V
    • Electrical Connection : industrial connector
    • Nominal Torque : 0.26 N.m
    • Device Short Name : ILA