This integrated drive is part of the Lexium ILA, ILE, ILS range, an offer of integrated drives for motion control. ILA1 is an integrated drive with an AC synchronous servo motor (24V to 36V) and features an integrated CANopen DS301 communication interface. It is equipped with a single turn encoder (16384 points/turn). Integrated holding brake is available as an option. This integrated drive comprise a motor, control electronics and a communication interface for CANopen DS301 machine bus. The motor flange size is 57mm x 57mm. The nominal speed of rotation of the motor varies from 3200 up to 5500rpm. It measures 57.2mm wide x 92.2mm high x 163.8mm deep with single turn encoder. It weighs 1.4kg. This integrated drive is designed for dynamic processes. This Lexium integrated drive is certified cURus, TÜV and marked CE. This product is compatible with accessories such as cordsets for STO signals and communication bus interfaces, IP54 sealing plates, plates with cable entries. The mounting positions are drive shaft horizontal, drive shaft vertical, shaft end down/shaft end up (defined and approved as per EN 60034-7). Lexium ILA, ILE, ILS are ervo motors with integrated drives for motion control. Lexium ILA, ILE, ILS are integrated drives for decentralised Motion Solutions with stepper, servo or brushless DC motor.

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : TÜV || cUL || UL
• Standards : IEC 61800-3 || IEC 60072-1 || EN 61800-3:2001, second environment || IEC 50178 || IEC 50347 || IEC 61800-3, Ed 2 || EN 61800-3 : 2001-02
• Ambient Air Temperature For Operation : 50-65 °C (with power derating of 2 % per °C) || 0-50 °C (without derating)
• Shock Resistance : 150 m/s² 1000 shocks IEC 60068-2-29
• Vibration Resistance : 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
• Permissible Ambient Air Temperature Around The Device : 105 °C power amplifier || 110 °C motor
• Ambient Air Temperature For Storage : -25-70 °C
• Relative Humidity : 15-85 % without condensation
• Ip Degree Of Protection : IP41 shaft bushing: conforming to IEC 60034-5 || IP54 total except shaft bushing: conforming to IEC 60034-5
• Operating Altitude : <= 3280.84 ft (1000 m) without derating
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP2011004EN
• Packaging Without Single Use Plastic : No
• Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI2011004EN
• Take-Back : No
• Carbon Footprint Of The Use Phase [B2, B3, B4, B6] : 457.0882442748
• Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 21.179523913
• Carbon Footprint Of The Distribution Phase [A4] : 0.3 kg CO2 eq.
• Pvc Free : Yes
• Carbon Footprint Of The Installation Phase [A5] : 0 kg CO2 eq.
• Sustainable Packaging : No
• Total Lifecycle Carbon Footprint : 479 kg CO2 eq.
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Carbon Footprint Of The End-Of-Life Phase [C1 To C4] : 0.3346147783
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 478.9502659061
• Complementary
• Circle Diameter Of The Mounting Holes : 66.6 mm
• Current Consumption : 5000 mA maximum continuous || 7000 mA peak
• Maximum Switching Current : 100 mA per output || 200 mA total
• Maximum Radial Force Fr : 89 N
• Mounting Support : flange
• Number Of Motor Stacks : 1
• Rotor Inertia : 0.1 kg.cm²
• Continuous Stall Torque : 0.26 N.m
• Centring Collar Depth : 1.6 mm
• Discrete Input Current : 10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
• Second Shaft : without second shaft end
• Marking : CE
• Shaft Length : 20 mm
• Net Weight : 1.4 kg
• Voltage State 0 Guaranteed : -3...4.5 V
• Centring Collar Diameter : 50 mm
• Motor Flange Size : 57 mm
• Peak Stall Torque : 0.6 N.m
• Number Of Mounting Holes : 4
• Shaft Diameter : 9 mm
• Discrete Output Voltage : 23...25 V
• Supply Voltage Limits : 18-40 V
• Mounting Holes Diameter : 5.2 mm
• Speed Feedback Resolution : 16384 points/turn
• Type Of Cooling : natural convection
• Service Life In Hours : 20000 h bearing
• Shaft End : untapped
• Feedback Type : single turn encoder
• Protection Type : short circuit of the output voltage || overload of output voltage || safe torque off
• Transmission Rate : 50, 100, 125, 250, 500, 800 and 1000 kbauds
• Accuracy Error : +/- 0.05 °
• Input/Output Type : 4 signals (each be used as input or output)
• Maximum Axial Force Fa : 104 N force pressure) || 104 N tensile force)
• Associated Fuse Rating : 10 A
• Voltage State 1 Guaranteed : 15...30 V
• Specifications
• Country of Origin : Germany
• Weight : 1.4 kg
• Range Of Product : Lexium integrated drive
• Network Type : DC
• Winding Type : medium speed of rotation and medium torque
• Number Of Motor Poles : 6
• Holding Brake : without
• Product Or Component Type : motion integrated drive
• Phase : single phase
• Length : 145.3 mm
• [Us] Rated Supply Voltage : 24 V || 36 V
• Communication Interface : CANopen DS301, Integrated
• Gear Box Type : without
• Motor Type : AC Synchronous Servo Motor
• Nominal Speed : 3200 rpm 24 V || 5500 rpm 36 V
• Electrical Connection : printed circuit board connector
• Nominal Torque : 0.26 N.m
• Device Short Name : ILA