Schneider Electric at Mayer

brushless DC motor, Lexium ILA ILE ILS, 24 to 36V, CANopen DS301 interface, 122mm, without gearbox

Intg. BLDC, 24-36V, CANopen"

SQDILE1F661PB1A0 ILE1F661PB1A0 3389119222303
1055.33 / EA
http://schema.org/OutOfStock
Mayer-DDS-brushless DC motor, Lexium ILA ILE ILS, 24 to 36V, CANopen DS301 interface, 122mm, without gearbox-1
  • IsSustainable: No
  • Motor Type: Brushless DC Motor
  • Shaft Diameter: 8 mm
  • Shaft End: Untapped
  • Shaft Length: 25 mm
  • Warranty Length: 18 mth
This product is part of the Lexium ILE range, an offer of integrated motion drives for motion control. The motion integrated drive with a 6-pole brushless DC motor features an integrated CANopen DS301 communication interface and untapped shaft without holding brake. The brushless DC motor with a rated supply voltage of 24V, 36V DC, a peak current consumption of 7000mA and a nominal speed of 4800RPM at 36V. The shaft dimensions are 8mm (diameter) x 25mm (length). It is furnished with printed circuit board connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 122mm (length) x 66mm (width) and the centering collar dimensions are 2mm (depth) x 40mm (diameter) with 73.54mm mounting hole. Its weighs 1.4kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, EN/IEC 50178, EN 61800-3 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 66mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
QTY
  • Features
  • Specifications
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Features
    • With brushless DC motor
    • High detent torque
    • Absolute position feedback
  • Communications & Management Attributes
    • Communication Interface : CANopen DS301, Integrated
  • Physical Attributes
    • Motor Flange Size : 66 mm
    • Shaft Length : 25 mm
  • Conformance Attributes
    • Product Certifications : cUL, UL, TÜV
    • Standards : IEC 50347, IEC 61800-3, Ed 2, EN 61800-3:2001, second environment, EN 61800-3 : 2001-02, IEC 61800-3, IEC 50178, IEC 60072-1
  • Complementary Attributes
    • Maximum Axial Force FA : 30 N force pressure), 30 N tensile force)
    • Maximum Supply Current : 0.06 A 36 V power stage disabled), 0.1 A 24 V power stage disabled), 4.7 A 24 V, 5.1 A 36 V
    • Maximum Switching Current : 100 mA per output, 200 mA total
    • Maximum Mechanical Speed : 5000 rpm
    • Maximum Radial Force FR : 80 N
  • Important Information Attributes
    • Coefficient 1 1 : -7.5E-05 N.m/rpm, -7.5E-05 N.m/rpm
    • Coefficient 2 1 : -8E-06 N.m/rpm, -8E-06 N.m/rpm
    • Current Consumption : 7000 mA peak, 5500 mA maximum continuous
    • Nominal Speed : 4000 rpm 24 V, 4800 rpm 36 V
    • Nominal Torque : 0.175 N.m 24 V, 0.24 N.m 36 V
    • Peak Stall Torque : 0.26 N.m 24 V, 0.36 N.m 36 V
    • Protection Type : overload of output voltage, short circuit of the output voltage, safe torque off
    • Supply Voltage Description : single phase 24 V DC, single phase 36 V DC
    • Us Rated Supply Voltage2 : 24 V, 36 V
    • Carbon Footprint Of The Distribution Phase A4 : 0.2172768738, 0.2 kg CO2 eq.
    • Carbon Footprint Of The End Of Life Phase C1 To C4 : 0.2 kg CO2 eq., 0.2260156893
    • Carbon Footprint Of The Installation Phase A5 : 0.0128826, 0 kg CO2 eq.
    • Carbon Footprint Of The Manufacturing Phase A1 To A3 : 17 kg CO2 eq., 17.1473708738
    • Carbon Footprint Of The Use Phase B2 B3 B4 B6 : 191 kg CO2 eq., 191.4232
    • Local Data Status : Publishable
    • Local Publishable Date : 2026-01-12
    • Manufacturer : Schneider Electric
    • Device Type : Motion - integrated drive
    • Serviceability : Yes
    • Traceability : Yes
    • Field Service Division : IDIBS
    • Average Life Duration : 15 year(s)
    • Legacy WEEE Scope : In
    • Scope Perimeter : At least in Europe
    • EOLI Availability Display : Yes
    • End Of Life Doc Ref : ENVEOLI2011005EN
    • Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
    • Reach Full Compliance Status Id : CONTAINS_SVHC
    • Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
    • ROHS EUR In Scope : No
    • ROHS EUR Status : Compliant with Exemptions
    • ROHS EUR Full Compliance Status : Pro-active compliance (Product out of EU RoHS legal scope)
    • ROHS EUR Full Compliance Status Id : PRO_ACTIVE_COMPLIANCE
    • China ROHS In Scope : Yes
    • With Recycled Cardboard : Yes
    • Without Single Use Plastic : No
    • Product Contributes To Saved And Avoided Emissions : No
    • Return Indicator : N
    • Associated Fuse Rating : 10 A
    • Centring Collar Diameter : 40 mm
    • Circle Diameter Of The Mounting Holes : 73.54 mm
    • Coefficient 1 0 : 0.485 N.m
    • Coefficient 2 0 : 0.27 N.m
    • Coefficient M0 : 8E-06 N.m/rpm
    • Coefficient M0 Max : 8E-06 N.m/rpm
    • Compatibility Code : ILE
    • Continuous Stall Torque : 0.27 N.m
    • Curve Type : lin
    • Detent Torque : 0.08 N.m
    • Device Short Name : ILE
    • Electrical Connection : printed circuit board connector
    • Feedback Type : BLDC encoder
    • Gear Box Type : without
    • Holding Brake : without
    • Marking : CE
    • Motor Type : brushless DC motor
    • Mounting Holes Diameter : 4.4 mm
    • Mounting Support : flange
    • Network Type : DC
    • Package Weight Lbs : 1.684 kg
    • Phase : single phase
    • Product Availability : Non-Stock - Not normally stocked in distribution facility
    • Product Or Component Type : motion integrated drive
    • Range Of Product : Lexium integrated drive
    • Reduction Ratio : 1:1
    • Returnability : No
    • Rotor Inertia : 0.149 kg.cm²
    • Second Shaft : without second shaft end
    • Service Life In Hours : 20000 h bearing
    • Shaft Diameter : 8 mm
    • Shaft End : untapped
    • Shock Resistance : 150 m/s² 1000 shocks IEC 60068-2-29
    • Sizing Reference : ILE1_661_A0
    • Speed Feedback Resolution : 12 points/turn
    • Supply Voltage Limits : 18-40 V
    • Sustainable Packaging : No
    • Total Lifecycle Carbon Footprint : 209 kg CO2 eq.
    • Transmission Rate : 50, 100, 125, 250, 500, 800 and 1000 kbauds
    • Type Of Cooling : natural convection
    • Vibration Resistance : 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
    • Voltage 1 : 24 V
    • Voltage 1 Speed 1 : 3208.955 rpm
    • Voltage 1 Speed 1 Max : 3208.955 rpm
    • Voltage 2 : 36 V
    • Voltage 2 Speed 2 : 3208.955 rpm
    • Voltage 2 Speed 2 Max : 3208.956 rpm
    • Voltage State 0 Guaranteed : -3...4.5 V
    • Voltage State 1 Guaranteed : 15...30 V
    • Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Winding Type : medium speed of rotation and medium torque
    • Accuracy Error Angular2 : 1 °
    • Medium Desc : brushless DC motor, Lexium ILA ILE ILS, 24 to 36V, CANopen DS301 interface, 122mm, without gearbox
    • Stocking Flag : Y
    • Product Kit Identifier : N
    • Accuracy Error Angular3 : 1 °
    • Pep Code : ENVPEP2011005EN
    • Database Version : 2016-11
    • Pep Verification Date : 2020-11-01
    • Pcr Version : PCR-ed3-EN-2015 04 02
    • Type Of Verification For The Pep : Independent internal review
    • Data Source : extrapolated product
    • Functional Unit Description : To coordinate and synchronize motion control with stepper, servo or burshless DC motor 70% of the time for 10 years.
    • Functional Unit Unit : Unit
    • Energy Model Manufacturing A1 A3 2 : Energy model used: Germany
    • Energy Model Installation A5 2 : Electricity mix; AC; < 1kV; EU-27
    • Energy Model Use B6 2 : Electricity mix; AC; < 1kV; EU-27
    • Energy Model End Of Life C1 C4 2 : Electricity mix; AC; < 1kV; EU-27
    • Global Commercial Status : Commercialised
  • Environment Attributes Main
    • Take Back : No, Nej
    • Ambient Air Temperature For Operation : 50-65 °C (with power derating of 2 % per °C), 0-50 °C (without derating)
    • EU ROHS Directive : Compliant By Exemption , Pro-active compliance (Product out of EU RoHS legal scope)
    • IP Degree Of Protection : IP41 shaft bushing: conforming to IEC 60034-5, IP54 total except shaft bushing: conforming to IEC 60034-5
    • Operating Altitude : <= 3280.84 ft (1000 m) without derating, <= 3280.84 ft (1000 m) without derating, <= 3280.84 ft (1000 m) without derating, <= 3280.84 ft (1000 m) without derating
    • Permissible Ambient Air Temperature Around The Device : 105 °C power amplifier, 110 °C motor
    • ROHS Exemption Information : Yes
    • Recycled Metal Content At Cr Level : 0 %
    • China ROHS Regulation : X
    • Mercury Free : Yes
    • Carbon Footprint : 209.0267460369
    • Ambient Air Temperature For Storage : -25-70 °C
    • Circularity Profile : ENVEOLI2011005EN
    • Environmental Disclosure : ENVPEP2011005EN
    • Packaging Made With Recycled Cardboard : Yes
    • Packaging Without Single Use Plastic : No
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • Relative Humidity : 15-85 % without condensation
    • Pep Code : ENVPEP2011005EN
    • Pep Verification Date : 2020-11-01
    • Pcr Version : PCR-ed3-EN-2015 04 02
    • Type Of Verification For The Pep : Independent internal review
  • General Attributes
    • Phase : single phase
    • Product Or Component Type : motion integrated drive
    • Range Of Product : Lexium integrated drive
  • Output Attributes
    • Nominal Output Power : 117 W 36 V, 74 W 24 V
    • Discrete Output Voltage : 23...25 V
  • Contractual Warranty Attributes
    • Warranty Period : 18 months
    • Warranty : 18 months
  • Input Attributes
    • Discrete Input Current : 10-10 mA at 24 V on/STO_A safety input, 3-3 mA at 24 V on/STO_B safety input, 2-2 mA at 24 V 24 V signal interface
    • Input Output Type : 4 signals (each be used as input or output)