8 x 1/2 in. Wafer Head Phillips Drywall Screws - Steel Zinc - 100qty

8 X 1/2 PHIL WAFER HD DRYWALL

MTLJWDS1C JWDS1C 639720804140
0.08 / Each
http://schema.org/OutOfStock
Mayer-DDS-8 x 1/2 in. Wafer Head Phillips Drywall Screws - Steel Zinc - 100qty-1
  • Country of Origin: MUL
  • Finish: Zinc
  • Height: 2.15 in
  • Length: 3 in, 76.2 mm
  • Material: Steel Zinc
  • Weight: 0.375 lb
  • Width: 3 in, 76.2 mm
These wafer head drywall screws offer an extra wide head best used on thin metal less than .050” thick. The head is an integrally formed round washer with a low rounded top that is approximately 75% the diameter of the washer providing low clearance and an extra-large bearing surface. The steel zinc material provides superior corrosion resistance, dramatically increasing the lifespan of the fastener.
QTY
  • Product Description
  • Features
  • Specifications
These wafer head drywall screws offer an extra wide head best used on thin metal less than .050” thick. The head is an integrally formed round washer with a low rounded top that is approximately 75% the diameter of the washer providing low clearance and an extra-large bearing surface. The steel zinc material provides superior corrosion resistance, dramatically increasing the lifespan of the fastener.
  • Features
    • 8 Diameter, 1/2" Length
    • Steel Zinc Material
    • Wafer Head with Phillips Drive
    • Large Diameter Head Provides Greater Holding Surface, Ideal for Metal Lathe To Metal Studs Up To 12 Gauge Thickness
  • Additional Notes
    • Other sizes and quantities available by request | There is no single standard for Wafer head dimensions. These values are offered as a guide; deviations from these specifications may occur. | This table is only a guide and does not constitute a warranty of any type .
  • Specifications
    • Country of Origin : MUL
    • Length : 3 in
    • Width : 3 in
    • Height : 2.15 in
    • Weight : 0.375 lbs
    • All self-drilling screws offer economical benefits : reduces labour and tooling costs; reduces or eliminates drill bits and taps
    • Collection Folder : JWDS1C
    • NPD Date Electrical : 01/04/2005 00:00:00
    • MATERIAL : Steel Zinc
    • Thread Type : UNF
    • Division : Electrical H1
    • Field Application : Electrical, Plumbing, Heating and Air Conditioning Industries
    • FINISH : Zinc
    • Sub-Division : Electrical-E H2
    • PRODUCT FAMILY : Electrical Supplies
    • Fastener Head Type : Wafer
    • Pack Type : Jar
    • Screw Point Type : Drill Point
    • Product Weight : 170 g
    • Product Width : 76.2 MM
    • Product Height : 54.61 MM
    • IGCC : 2756
    • Torsional Strength : 42 lb-in minimum
    • Product Series : WDS
    • Material Standard : AISI 1016 - 1024
    • NEURSPE : https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Wafer_Hd_Phil_Self-Drill_Tap_Dry_Scr.pdf
    • Wafer Thickness : 0.025 - 0.035 IN
    • Type : Type BSD Self-Drilling & Tapping Drywall Screw
    • Thread Per Inch : 18
    • PHILLIPS Recess Depth : 0.255
    • Order Minimum Imperial : 100
    • ARRA Compliant : N
    • Order Minimum UOM Imperial : JR
    • Fastener Length : 2-Jan
    • Driver Size : #2
    • Drive Type : Phillips
    • PHILLIPS Recess Diameter : 0.176 - 0.189
    • Hardness : Rockwell C32-40
    • Language Code : EN
    • Buy American Compliant : No
    • Panel Thickness : 0.350 - 0.100 IN
    • Product Length : 76.2 MM
    • Fastener Head Width : 0.359 - 0.38 in.
    • Thread Standard : SAE J78 - 2013