primary_image

4 Terminal Ringless Small Hub Open Triplex Ground 125 Ampere

4 Terminal Ringless Small Hub Open Triplex Ground 125 Ampere

MILU7487RLTG U7487-RL-TG 784572141179
71.70 / EACH
http://schema.org/OutOfStock
Mayer-DDS-4 Terminal Ringless Small Hub Open Triplex Ground 125 Ampere-1
  • Amperage: 125 A
  • Cable Entry: Overhead Or Underground
  • Frequency: 60 Hz
  • Height: 11.5 in
  • Hub Style: Small Hub Opening
  • Insulation Type: Glass Polyester
  • Length: 3.313 in
  • Material: G90 Galvanized Steel With Powder Coat Finish
  • Mounting Type: Surface Mount
  • Number of Phases: 1
  • Number of Terminations: 4
  • Standard: Type 3R, UL Listed
  • Terminal Type: Lay In
  • Type: Ringless Meter Socket
  • Voltage: 600 V
  • Width: 8 in
4 TERM RNGLS SML HUB OPEN TRIPLEX GND 125 AMP
QTY
  • Product Description
  • Specifications
4 TERM RNGLS SML HUB OPEN TRIPLEX GND 125 AMP
  • Specifications
    • Brand Name : Milbank
    • Type : Ringless Meter Socket
    • Application : Meter Socket
    • Standard : UL Listed;Type 3R
    • Voltage Rating : 600 Volts Alternating Current
    • Amperage Rating : 125 Continuous Ampere
    • Phase : 1 Phase
    • Frequency Rating : 60 Hertz
    • Size : 3.313L x 8W x11.5H
    • Number of Main Breakers : 0
    • Main Breaker Size : No Main Breaker
    • Cable Entry : Overhead or Underground
    • Terminal : Lay in
    • Insulation : Glass Polyester
    • Mounting : Surface Mount
    • Material : G90 Galvanized Steel with Powder Coat Finish
    • Number of Jaws : 4 Terminal
    • Bypass Provision : No Bypass
    • Number of Meter Positions : 1 Position
    • Equipment Ground : Triplex Ground
    • Hub/Closing Plate : Small Hub Opening
    • Line Side Wire Range : 6 - 2/0 AWG
    • Load Side Wire Range : 6 - 2/0 AWG
    • Number of Receptacles : 0
    • Height : 11.5 IN
    • Length : 3.313 IN
    • Width : 8 IN
    • UNSPSC Number : 39121102
    • Product Family Code : 4T12
    • Product Family Disclaimer : Please consult serving utility for their requirements prior to ordering or installing, as specifications and approvals vary by utility and may require local electrical inspector approval. All installations must be installed by a licensed electrician and must comply with all national and local codes, laws and regulations. Milbank reserves the right to make changes in specifications and features shown without notice or obligation.