4 Terminal Ringless Small Hub Open Horn Bypass Duquesne Light Company

200A 4T RL OH

MILU7021RLKKDLC U7021-RL-KK-DLC 784572139923
114.09 / EACH
http://schema.org/OutOfStock
Mayer-DDS-4 Terminal Ringless Small Hub Open Horn Bypass Duquesne Light Company-1
  • Amperage: 200 A
  • Cable Entry: Overhead
  • Frequency: 60 Hz
  • Height: 15.5 in
  • Hub Style: Small Hub Opening
  • Insulation Type: Glass Polyester
  • Length: 4.125 in
  • Material: G90 Galvanized Steel With Powder Coat Finish
  • Mounting Type: Surface Mount
  • Number of Phases: 1
  • Number of Terminations: 4
  • Standard: Type 3R, UL Listed
  • Terminal Type: Lay In
  • Type: Ringless Meter Socket
  • Voltage: 600 V
  • Width: 8 in
4 TERM RNGLS SML HUB OPEN HRN BYPS DUQUESNE LIGHT COMPANY
QTY
  • Product Description
  • Specifications
4 TERM RNGLS SML HUB OPEN HRN BYPS DUQUESNE LIGHT COMPANY
  • Specifications
    • Brand Name : Milbank
    • Type : Ringless Meter Socket
    • Special Features : Duquesne Light Company
    • Application : Meter Socket
    • Standard : UL Listed;Type 3R
    • Voltage Rating : 600 Volts Alternating Current
    • Amperage Rating : 200 Continuous Ampere
    • Phase : 1 Phase
    • Frequency Rating : 60 Hertz
    • Size : 4.125L x 8W x15.5H
    • Number of Main Breakers : 0
    • Main Breaker Size : No Main Breaker
    • Cable Entry : Overhead
    • Terminal : Lay in
    • Insulation : Glass Polyester
    • Mounting : Surface Mount
    • Material : G90 Galvanized Steel with Powder Coat Finish
    • Number of Jaws : 4 Terminal
    • Bypass Provision : Horn Bypass
    • Number of Meter Positions : 1 Position
    • Equipment Ground : Bonded Neutral
    • Hub/Closing Plate : Small Hub Opening
    • Line Side Wire Range : 6 AWG - 350 kcmil
    • Load Side Wire Range : 6 AWG - 350 kcmil
    • Number of Receptacles : 0
    • Height : 15.5 IN
    • Length : 4.125 IN
    • Width : 8 IN
    • UNSPSC Number : 39121102
    • Product Family Code : 4T20
    • Product Family Disclaimer : Please consult serving utility for their requirements prior to ordering or installing, as specifications and approvals vary by utility and may require local electrical inspector approval. All installations must be installed by a licensed electrician and must comply with all national and local codes, laws and regulations. Milbank reserves the right to make changes in specifications and features shown without notice or obligation.