primary_image

4 Terminal Ringless Small Closing Plate Triplex Ground

200A 4T RL OU

MILU7040XLTG U7040-XL-TG 784572140356
90.03 / EACH
http://schema.org/OutOfStock
Mayer-DDS-4 Terminal Ringless Small Closing Plate Triplex Ground-1
  • Amperage: 200 A
  • Cable Entry: Overhead Or Underground
  • Frequency: 60 Hz
  • Height: 14.563 in
  • Hub Style: Small Closing Plate
  • Insulation Type: Glass Polyester
  • Length: 4.125 in
  • Material: G90 Galvanized Steel With Powder Coat Finish
  • Mounting Type: Surface Mount
  • Number of Phases: 1
  • Number of Terminations: 4
  • Standard: Type 3R, UL Listed
  • Terminal Type: Lay In
  • Type: Ringless Meter Socket
  • Voltage: 600 V
  • Width: 11 in
4 TERM RNGLS SML CLS PLT TRIPLEX GND
QTY
  • Product Description
  • Specifications
4 TERM RNGLS SML CLS PLT TRIPLEX GND
  • Specifications
    • Brand Name : Milbank
    • Type : Ringless Meter Socket
    • Application : Meter Socket
    • Standard : UL Listed;Type 3R
    • Voltage Rating : 600 Volts Alternating Current
    • Amperage Rating : 200 Continuous Ampere
    • Phase : 1 Phase
    • Frequency Rating : 60 Hertz
    • Size : 4.125L x 11W x14.563H
    • Number of Main Breakers : 0
    • Main Breaker Size : No Main Breaker
    • Cable Entry : Overhead or Underground
    • Terminal : Lay in
    • Insulation : Glass Polyester
    • Mounting : Surface Mount
    • Material : G90 Galvanized Steel with Powder Coat Finish
    • Number of Jaws : 4 Terminal
    • Bypass Provision : No Bypass
    • Number of Meter Positions : 1 Position
    • Equipment Ground : Triplex Ground
    • Hub/Closing Plate : Small Closing Plate
    • Line Side Wire Range : 6 AWG - 350 kcmil
    • Load Side Wire Range : 6 AWG - 350 kcmil
    • Number Branch Circuits : 0
    • Number of Receptacles : 0
    • Height : 14.563 IN
    • Length : 4.125 IN
    • Width : 11 IN
    • UNSPSC Number : 39121102
    • Product Family Code : 4T20
    • Product Family Disclaimer : Please consult serving utility for their requirements prior to ordering or installing, as specifications and approvals vary by utility and may require local electrical inspector approval. All installations must be installed by a licensed electrician and must comply with all national and local codes, laws and regulations. Milbank reserves the right to make changes in specifications and features shown without notice or obligation.