4 Terminal Ringless Small Closing Plate Pack Inside Meter Socket 1-200 Ampere Main Breaker Wide Shell

200A 4T RL OU MAIN

MILU5896PXL200 U5896-PXL-200 784572518483
406.92 / EACH
http://schema.org/OutOfStock
  • Amperage: 200 A
  • Cable Entry: Overhead Or Underground
  • Frequency: 60 Hz
  • Height: 34.5 in
  • Hub Style: Small Closing Plate Included Inside Meter Socket
  • Insulation Type: Glass Polyester
  • Length: 4.5 in
  • Material: G90 Galvanized Steel With Powder Coat Finish
  • Mounting Type: Surface Mount
  • Number of Phases: 1
  • Number of Terminations: 4
  • Standard: Type 3R, UL Listed
  • Terminal Type: Lay In
  • Type: Ringless Meter Socket
  • Voltage: 240 V
  • Width: 17 in
4 TERM RNGLS SML CLS PLT PACK INSIDE MRSKT 1-200 AMP MN BRKR WIDE SHELL
QTY
  • Product Description
  • Specifications
4 TERM RNGLS SML CLS PLT PACK INSIDE MRSKT 1-200 AMP MN BRKR WIDE SHELL
  • Specifications
    • Brand Name : Milbank
    • Type : Ringless Meter Socket
    • Application : Meter Socket With Main
    • Standard : UL Listed;Type 3R
    • Voltage Rating : Up to 240 Volts Alternating Current
    • Amperage Rating : 200 Continuous Ampere
    • Phase : 1 Phase
    • Frequency Rating : 60 Hertz
    • Size : 4.5L x 17W x34.5H
    • Number of Main Breakers : 1
    • Main Breaker Size : One 200 Ampere Main Breaker
    • Cable Entry : Overhead or Underground
    • Terminal : Lay in
    • Insulation : Glass Polyester
    • Mounting : Surface Mount
    • Material : G90 Galvanized Steel with Powder Coat Finish
    • Number of Jaws : 4 Terminal
    • Bypass Provision : No Bypass
    • Number of Meter Positions : 1 Position
    • Equipment Ground : 2 Barrel Ground Lug
    • Hub/Closing Plate : Small Closing Plate Included Inside Meter Socket
    • Line Side Wire Range : 6 AWG - 350 kcmil
    • Load Side Wire Range : 1 AWG - 300 kcmil
    • Number of Receptacles : 0
    • Height : 34.5 IN
    • Length : 4.5 IN
    • Width : 17 IN
    • UNSPSC Number : 39121102
    • Product Family Code : MTMN
    • Product Family Disclaimer : Please consult serving utility for their requirements prior to ordering or installing, as specifications and approvals vary by utility and may require local electrical inspector approval. All installations must be installed by a licensed electrician and must comply with all national and local codes, laws and regulations. Milbank reserves the right to make changes in specifications and features shown without notice or obligation.