primary_image

4 Terminal Ring Type 2 In Hub Triplex Ground Less Seal Ring

200A 1PH OVERHEAD NES RING TYP

MILU7017DLTGLR U7017-DL-TG-LR 784572478718
118.31 / EACH
http://schema.org/OutOfStock
Mayer-DDS-4 Terminal Ring Type 2 In Hub Triplex Ground Less Seal Ring-1
  • Amperage: 200 A
  • Cable Entry: Overhead
  • Frequency: 60 Hz
  • Height: 15.5 in
  • Hub Style: 2 Inch Hub
  • Insulation Type: Glass Polyester
  • Length: 4.125 in
  • Material: G90 Galvanized Steel With Powder Coat Finish
  • Mounting Type: Surface Mount
  • Number of Phases: 1
  • Number of Terminations: 4
  • Standard: Type 3R, UL Listed
  • Terminal Type: Lay In
  • Type: Ring Type Meter Socket
  • Voltage: 600 V
  • Width: 8 in
4 TERM RNGTP 2 IN HUB TRIPLEX GND LESS SEAL RNG
QTY
  • Product Description
  • Specifications
4 TERM RNGTP 2 IN HUB TRIPLEX GND LESS SEAL RNG
  • Specifications
    • Brand Name : Milbank
    • Type : Ring Type Meter Socket
    • Application : Meter Socket
    • Standard : UL Listed;Type 3R
    • Voltage Rating : 600 Volts Alternating Current
    • Amperage Rating : 200 Continuous Ampere
    • Phase : 1 Phase
    • Frequency Rating : 60 Hertz
    • Size : 4.125L x 8W x15.5H
    • Number of Main Breakers : 0
    • Main Breaker Size : No Main Breaker
    • Cable Entry : Overhead
    • Terminal : Lay in
    • Insulation : Glass Polyester
    • Mounting : Surface Mount
    • Material : G90 Galvanized Steel with Powder Coat Finish
    • Number of Jaws : 4 Terminal
    • Bypass Provision : No Bypass
    • Number of Meter Positions : 1 Position
    • Equipment Ground : Triplex Ground
    • Hub/Closing Plate : 2 Inch Hub
    • Line Side Wire Range : 6 AWG - 350 kcmil
    • Load Side Wire Range : 6 AWG - 350 kcmil
    • Number of Receptacles : 0
    • Height : 15.5 IN
    • Length : 4.125 IN
    • Width : 8 IN
    • UNSPSC Number : 39121102
    • Product Family Code : 4T20
    • Product Family Disclaimer : Please consult serving utility for their requirements prior to ordering or installing, as specifications and approvals vary by utility and may require local electrical inspector approval. All installations must be installed by a licensed electrician and must comply with all national and local codes, laws and regulations. Milbank reserves the right to make changes in specifications and features shown without notice or obligation.