SQUARE D

Generator panel, QO, 1 phase, 4 spaces, 8 circuits, 30A main breaker with interlock, NEMA1, surface cover door

LOADCTR QO MB GEN PANEL 240V 3

SQDQO48M30DSGP QO48M30DSGP 785901868200
257.38 / EACH
http://schema.org/OutOfStock
  • Cover Type: Surface Cover With Door
  • Depth: 97 mm
  • Enclosure Material: Welded Sheet Steel
  • Height: 319 mm
  • Number of Circuits: 8
  • Number of Spaces: 4
  • Short Circuit Current Rating: 10 kA
  • Surface Finish: Baked Enamel Gray
  • Warranty Length: 18 mth
  • Width: 226 mm
QO generator panels are for the manual transfer from utility to generator power. QO generator panels are for back-up power applications. This sub-panel connects directly to the main load center and provides four single pole spaces that will accommodate up to eight circuits dedicated for back-up power. This QO generator panel uses two factory installed, two pole QO circuit breakers. One is fed by the utility, while the second circuit breaker is back-fed to the back-up power source, such as a generator. Power source switching is easy. Simply turn the main power breaker to the "OFF" position and then turn the generator fed breaker to the "ON" position. A factory installed mechanical interlock prevents both main breakers being in the "ON" position at the same time. This NEMA 1 enclosure with a surface cover with a door is for indoor applications. This panel has a 30A rating and a 10 kA short circuit current rating. The lugs will accept 14 AWG to 8 AWG copper or aluminum wire. This QO generator panel has a height of 12.57 inches, a width of 8.88 inches and a depth of 3.80 inches. This generator panel is UL Listed.
QTY
  • Product Description
  • Features
  • Specifications
QO generator panels are for the manual transfer from utility to generator power. QO generator panels are for back-up power applications. This sub-panel connects directly to the main load center and provides four single pole spaces that will accommodate up to eight circuits dedicated for back-up power. This QO generator panel uses two factory installed, two pole QO circuit breakers. One is fed by the utility, while the second circuit breaker is back-fed to the back-up power source, such as a generator. Power source switching is easy. Simply turn the main power breaker to the "OFF" position and then turn the generator fed breaker to the "ON" position. A factory installed mechanical interlock prevents both main breakers being in the "ON" position at the same time. This NEMA 1 enclosure with a surface cover with a door is for indoor applications. This panel has a 30A rating and a 10 kA short circuit current rating. The lugs will accept 14 AWG to 8 AWG copper or aluminum wire. This QO generator panel has a height of 12.57 inches, a width of 8.88 inches and a depth of 3.80 inches. This generator panel is UL Listed.
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Environment
    • Product Certifications : UL Listed
    • Ambient Air Temperature For Operation : -5 °C || 40 °C
    • Nema Degree Of Protection : NEMA 1 indoor enclosure
  • Contractual warranty
    • Warranty : 18 months
  • Environmental data
    • Rohs Exemption Information : Yes
    • Packaging Made With Recycled Cardboard : No
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP2212001
    • Packaging Without Single Use Plastic : No
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Circularity Profile : N/A
    • Take-Back : No
    • Eu Rohs Directive : Compliant with Exemptions
  • Complementary
    • Height : 319 mm
    • Phase : 1 phase 3 wires
    • Tightening Torque : Cover 20 lb.in
    • Electrical Connection : lugs
    • Number Of Circuits : 8
    • Number Of Spaces : 4
    • Short-Circuit Current : 10 kA
    • Number Of Tandem Circuit Breakers : 4
    • Material : tin plated aluminium: busbar
    • Surface Finish : baked enamel Gray
    • Line Rated Current : 30 A
    • Enclosure Material : welded sheet steel
    • Awg Gauge : AWG 14...AWG 8 aluminium/copper
    • Width : 226 mm
    • Depth : 97 mm
    • Load Center Type : main breaker
    • Device Composition : grounding bar (ordered separately)
    • Box Number : 4
  • Specifications
    • Country of Origin : Mexico
    • Width : 226 mm
    • Height : 319 mm
    • Range Of Product : QO
    • Product Or Component Type : panel
    • Cover Type : surface cover with door