Load center accessory, QO/Homeline, ground bar kit, 18 terminals, with AWG 1-4/0 lug in aluminum or copper

LOAD CENTER GROUND BAR KIT QO

SQDPK18GTAL PK18GTAL 785901440888
35.52 / EACH
http://schema.org/OutOfStock
Load center accessory, QO/Homeline, ground bar kit, 18 terminals, with AWG 1-4/0 lug in aluminum or copper
  • Country of Origin: USA
  • Depth: 0.312 in
  • Height: .437 in
  • Length: 224 mm
  • Warranty Length: 18 mth
QO® Circuit Breaker Load Centers, PK18GTAL, from Square D® are Underwriters Laboratories (UL) Listed and CSA rated panelboards. They are designed to meet residential, commercial, and industrial requirements to protect electrical systems, equipment, and people. All metering stacks are shipped from the factory with meter sockets and vertical bus bars pre-installed, and require a minimum of on site labour time to install the circuit breakers and main bus links. Screw-on, sealable covers over the meter sockets and circuit breakers are finished with a grey epoxy powder coating. Provision to lock and seal the circuit breaker handles in the “off” position has been made for the convenience of utilities and electrical inspectors. This main tap box with 1200A rated main bus and main 1 phase service can provide (3) AWG 4-750 MCM or (4) AWG 4-600 MCM in aluminium or copper lug size. The unit comes in sizes of height 19 in, 23 in width and 9.55 in of depth. All meter stacks are designed for CSA Type A “cold metering” in which the individual sub-service breakers are connected on the line side of the meter sockets thereby protecting the meter and all electrical equipment installed subsequent to it.
QTY
  • Product Description
  • Features
  • Specifications
QO® Circuit Breaker Load Centers, PK18GTAL, from Square D® are Underwriters Laboratories (UL) Listed and CSA rated panelboards. They are designed to meet residential, commercial, and industrial requirements to protect electrical systems, equipment, and people. All metering stacks are shipped from the factory with meter sockets and vertical bus bars pre-installed, and require a minimum of on site labour time to install the circuit breakers and main bus links. Screw-on, sealable covers over the meter sockets and circuit breakers are finished with a grey epoxy powder coating. Provision to lock and seal the circuit breaker handles in the “off” position has been made for the convenience of utilities and electrical inspectors. This main tap box with 1200A rated main bus and main 1 phase service can provide (3) AWG 4-750 MCM or (4) AWG 4-600 MCM in aluminium or copper lug size. The unit comes in sizes of height 19 in, 23 in width and 9.55 in of depth. All meter stacks are designed for CSA Type A “cold metering” in which the individual sub-service breakers are connected on the line side of the meter sockets thereby protecting the meter and all electrical equipment installed subsequent to it.
  • Prop 65
    • WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
  • Environmental data
    • Rohs Exemption Information : Yes
    • Packaging Made With Recycled Cardboard : No
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP2212001
    • Packaging Without Single Use Plastic : No
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • California Proposition 65 : WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
    • Circularity Profile : N/A
    • Take-Back : No
    • Eu Rohs Directive : Compliant with Exemptions
  • Complementary
    • Provided Equipment : 2 QO 1 screw
    • Height : .437 in
    • Tightening Torque : 30 lb.in || mounting screw 30 lb.in || 20 lb.in, AWG 14...AWG 10, copper || 20 lb.in, AWG 12...AWG 10, aluminium || 35 lb.in, AWG 6...AWG 4 || 25 lb.in, AWG 8 || 25 lb.in, AWG 14...AWG 12, copper || 25 lb.in, AWG 12...AWG 10, aluminium
    • Maximum Length Of Segment : 80 mm
    • Bar Length : 224 mm
    • Awg Gauge : AWG 14...AWG 4 copper || AWG 12...AWG 4 aluminium || AWG 4...AWG 1 aluminium/copper
    • Depth : 0.312 in
    • Number Of Connectors : 19
    • Device Mounting : mounting holes back of enclosure
  • Specifications
    • Country of Origin : United States
    • Length : 224 mm
    • Height : .437 in
    • Range Of Product : QO
    • Product Or Component Type : bar
  • Contractual warranty
    • Warranty : 18 months