APC Smart-UPS X, Line Interactive, 2200VA, Rack/tower convertible 2U, 100V-127V, 6x 5-15R+2x 5-20R NEMA, SmartSlot, Extended runtime

Smart-UPS SMX2200RMLV2U

SQDSMX2200RMLV2U SMX2200RMLV2U 731304268567
2440.64 / EA
http://schema.org/OutOfStock
Mayer-DDS-APC Smart-UPS X, Line Interactive, 2200VA, Rack/tower convertible 2U, 100V-127V, 6x 5-15R+2x 5-20R NEMA, SmartSlot, Extended runtime-1
  • Depth: 26.26 in, 66.7 cm
  • Height: 3.35 in, 8.5 cm
  • Warranty Length: 2 yr, 3 yr
  • Width: 17.00 in, 43.18 cm
This APC Smart-UPS is designed for IT managers or network administrators to maintain business uptime, data transfer and continuity during prolonged power outages. The 2200VA line interactive 2U rack/tower UPS provides pure sine wave power to support critical electronics during power disruptions. The SMX comes with NEMA L5-30P input, 6x NEMA 5-15R and 2x NEMA 5-20R outlets. The UPS has a SmartSlot for optional Network Management Card that enables graceful shutdown of physical servers, virtual machines & HCI Clusters via PowerChute Network Shutdown. This uninterrupted power supply can connect to EcoStruxure IT or third-party centralized management platforms. The SMX UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. This is compatible with dedicated user-replaceable battery, and the APC replacement battery cartridge helps restore UPS performance to the original specifications. The Smart-UPS comes with a pair of tower-mounting stabilizing feet and rack-mounting brackets. The 3 switchable outlet groups allow more granular management of the power supplied to your devices. The Emergency Power Off feature enables the UPS to remotely shutdown during emergencies.
QTY
  • Features
  • Specifications
  • Features
    • StruxureWare Data Center Expert compatible — Enables centralized management via StruxureWare Data Center Expert.
    • Predictive failure notification. — Provides early-warning fault analysis ensuring proactive component replacement.
    • Wide input voltage range — Designed for harsh electrical environments to save battery life.
    • LED Indicators — Provide easy-to-read status of the unit and utility power conditions.
    • Overload protection — Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
    • Network manageable — Provides remote power management of the UPS over the network.
    • Boost and Trim Automatic Voltage Regulation (AVR) — Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
    • Serial connectivity — Provides management of the UPS via a serial port.
    • High online efficiency — Reduces utility costs, generates less heat.
    • Green mode — Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
    • High frequency design — Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
    • Energy meter — Provides actual kilowatt hours of usage for energy conscious users.
    • Predictive replace battery date — Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
    • Intuitive LCD interface — Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
    • Auto recognition of external batteries — UPS recognizes when external battery packs are attached and automatically adjusts runtime.
    • Multiple switched outlet groups — Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
    • Pure sine wave output on battery — Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
    • Disconnected battery notification — Warns when a battery is not available to provide backup power.
    • Load shedding — Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).
    • Sequenced network shutdown and reboot — Customize network shutdown and reboot sequence of connected servers and UPSs.
    • Outlet group control — Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
    • Scalable runtime — Allows additional run time to be quickly added as needed.
    • Adjustable voltage sensitivity — Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
    • Adjustable voltage-transfer points — Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
    • Audible alarms — Provides notification of changing utility power and UPS power conditions
    • Automatic restart of loads after UPS shutdown — Automatically starts up the connected equipment upon the return of utility power.
    • Automatic self-test — Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    • Cold-start capable — Provides temporary battery power when the utility power is out.
    • Hot-swappable batteries — Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
    • Power conditioning — Protects connected loads from surges, spikes, lightning, and other power disturbances.
    • Battery failure notification — Provides early-warning fault analysis on batteries enabling timely preventive maintenance
    • Rack/Tower convertible — Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
    • Safety-agency approved — Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
    • SmartSlot — Customize UPS capabilities with management cards.
    • Temperature-compensated battery charging — Prolongs battery life by regulating the charge voltage according to battery temperature.
    • USB connectivity — Provides management of the UPS via a USB port (not available on all models).
    • User-replaceable batteries — Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
    • Intelligent battery management — Maximizes battery performance, life, and reliability through intelligent, precision charging.
    • Frequency and voltage regulation — Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • What's in the box?
    • CD with software
    • Documentation CD
    • Installation guide
    • Rack mounting hardware
    • Rack Mounting brackets
    • Rack Mounting support rails
    • Removable support feet
    • Smart UPS signalling RS-232 cable
    • USB cable
  • Conformance
    • Approvals : BSMI, CSA, NOM, TÜV, VCCI Class A
    • EquipmentProtectionPolicy : Lifetime : $150000
  • Battery
    • ReplacementBattery : APCRBC117
    • TypicalRechargeTime : 3 h
    • BatteryType : Lead-Acid battery
  • Sustainability
    • Rohs : Compliant with Exemptions
    • Reach : Reference contains Substances of Very High Concern above the threshold
    • OptimizedEnergyEfficiency : Energy efficient product
    • TakeBack : Yes
    • MercuryFree : Yes
    • CaliforniaProposition65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Weight, Height, Width, Depth
    • Weight : 84.77 lb(US) (38.45 kg)
    • Height : 3.35 in (8.5 cm) in
    • Width : 17.00 in (43.18 cm) in
    • Depth : 26.26 in (66.7 cm) in
  • Physical
    • ProductOrientation : lower
    • RackHeight : 2U
    • Color : Black
    • SurgeEnergyRating : 540 J
    • MountPosition : front
  • Input
    • CordLength : 8 ft (2.44 m)
    • InputConnectionType : NEMA L5-30P
    • InputVoltage : 120 V
  • Output
    • OutputPowerCapacity : 2200 VA
    • OutputConnections : 6 NEMA 5-15R, 2 NEMA 5-20R
    • NominalOutputVoltage : 120 V
    • Topology : Line Interactive
    • Waveformtype : Sine wave
  • Warranty
    • Warranty : 3 years repair or replace (excluding battery) and 2 years for battery, optional on-site warranties available, optional extended warranties available