APC Rack PDU, 2G, switched, 0U, 30A, 100V to 120V, 24 NEMA 5-20R sockets

PDU 2G SWITCHED ZEROU 30A

APCAP8932 731304307532
1860.00 / EA
http://schema.org/OutOfStock
Mayer-DDS-APC Rack PDU, 2G, switched, 0U, 30A, 100V to 120V, 24 NEMA 5-20R sockets-1
  • Cable Length: 9.84 ft
  • Certifications: CUL Listed, PSE, UL Listed
  • Depth: 4.6 cm
  • Height: 179.1 cm
  • Line Rated Current: 24 A
  • Net Weight: 7.85 kg
  • Standard: FCC Part 15 Class A, ICES-003, UL 60950-1
  • Storage Temperature: -25-65 °C
  • Warranty Length: 2 yr
  • Width: 5.5 cm
QTY
  • Specifications
  • Environment
    • Storage Relative Humidity : 5-95 %
    • Product Certifications : cUL Listed || PSE || UL Listed
    • Ambient Air Temperature For Operation : -5-60 °C
    • Standards : FCC Part 15 class A || ICES-003 || UL 60950-1
    • Storage Altitude : 0-50000 ft
    • Ambient Air Temperature For Storage : -25-65 °C
    • Relative Humidity : 5-95 %
    • Operating Altitude : 0...10000 ft
  • Contractual warranty
    • Warranty : 2 years repair or replace
  • Offer Sustainability
    • Rohs Exemption Information : Yes
    • Mercury Free : Yes
    • Environmental Disclosure : ENVPEP1612035_EN
    • Take-Back : Take-back program available
    • Lead Free : Yes
    • Reach Regulation : Reference contains Substances of Very High Concern above the threshold
    • Optimized Energy Efficiency : Energy efficient product
    • Eu Rohs Directive : Compliant with Exemptions
  • Complementary
    • Height : 179.1 cm
    • Net Weight : 7.85 kg
    • Mounting Location : side
    • Main Input Voltage : 100 V || 120 V
    • Input Frequency : 50/60 Hz
    • Mounting Mode : not rack-mountable
    • Number Of Rack Unit : 0U
    • Line Rated Current : 24 A
    • Mounting Position : vertical
    • Width : 5.5 cm
    • Depth : 4.6 cm
  • Overview
    • Lead Time : Usually in Stock
    • Presentation : APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
  • Specifications
    • Number Of Cables : 1
    • Cable Length : 9.84 ft
    • Color : Black
    • Provided Equipment : Installation guide || Rack Mounting brackets || Serial configuration cable || Safety guide