The Signamax 10/100 to 100FX Media Converters with Link Fault Signaling provides the means for an SNMP managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with certain options. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance.

• Features
• DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
• Built-In 10/100BaseT/TX Switch utilizes store-and-forward architecture
• Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis
• LEDs for functions, links, and activity
• Limited lifetime warranty
• Certifications
• CE, FCC, ROHS, VCCI Class A
• Ports
• 1 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDIX port plus 1 – fiber optic
• 100BaseFX port with varying connectors and span per P/N
• Applicable Standards
• IEEE 802.3 10BaseT
• IEEE 802.3u 100BaseTX
• IEEE 802.3u 100BaseFX
• Warranty
• Limited Lifetime
• Electrical Characteristics
• 12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

• Environmental Requirements
• Operating Temperature : 32°F to 122°F (0°C to 50°C);
• Storage Temperature : -14°F to 158°F (-10°C to 70°C)
• Relative Humidity : 5% to 95% (non-condensing)
• LED Status Indicators
• Per Unit : Power
• Per RJ-45 Port : Link/Activity, Full Duplex/Collision (FDX/COL); RJ-45 port speed
• Per Fiber Port : Link/Activity, Full Duplex/Collision (FDX/COL)
• Physical Characteristics
• Dimensions : 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
• Weight : 0.33 lb (150 g)
• Fiber Interface
• Type : P/Ns 065-1100/1110/1174: LED
• Wavelength : P/Ns 065-1100/1110/1174: 1300 nm nominal (1270 nm max.,1380 nm min.)
• Max Output Power : P/Ns 065-1100/1110/1174: -14.0 dBm
• Min Output Power : P/Ns 065-1100/1110/1174: -20.0 dBm
• Sensitivity : P/Ns 065-1100/1110/1174: -33.0 dBm
• Max Input Power : P/Ns 065-1100/1110/1174: -8.0 dBm
• Link Power Budget : P/Ns 065-1100/1110/1174: 13.0 dB
• Performance
• Latency : < 4.2 μs (LIFO)
• Throughput @ 100Base : 148,809 pps (64-byte packets)
• Speed : 100BaseTX: 100/200 Mbps for half/full duplex; 10BaseT: 10/20 Mbps for half/full duplex
• MAC Address Capacity : 1K; Memory: 256 KB