This product is part of the Easy Harmony Solid State Relays range, an offer of single phase panel mounted SSR. It is a single-phase panel mounted Solid state relay. This 50A rated relay is controlled with a 5V to 24V DC input, and has a rated load voltage of 24V to 240V AC with zero voltage switching, ideal for resistive loads. It is designed mainly for electrical heating applications, such as plastic, rubber, textile, lithium battery, and solar industries. It is a contactless switch and offers fast response, high reliability, and long service life performances. Its dimensions are 45mm (width) x 59mm (height) x 29mm (depth) and weighs 115g. The range of Easy Harmony Solid State Relays has been designed mainly for electrical heating applications. This product is CE, UL, TUV certified and conforms to UL 508, EN/IEC 60947-4-3, EN/IEC 62314, CSA C22.2 No 14 standards. It is designed for panel mounting by two fastener screws and comes with a transparent cover at the terminal side, which increases operation safety. It has an IP10 degree of protection. It is clearly distinguishable visually from a distance due to its LED indicator.

• Features
• High surge current capability ensures longer lifespan
• Wide voltage range from 24V to 240V AC
• UL, CE, and TUV certification applicable for most markets
• Lower leakage current ensures higher reliability
• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Complementary Attributes
• Maximum Voltage Drop : <1.6 V on-state, <1.6 V on-state<1.6 V on-state, <1.6 V on-state
• Absolute Maximum Voltage : 530 V
• Line Rated Current : 50 A
• Maximum Leakage Current : 1 mA off-state
• Maximum Switching Voltage : 2 V DC turn-off
• Minimum Switching Voltage : 4 V DC turn-on
• Rated Current : 50 A
• Uc Control Circuit Voltage : 4...32 V
• Uimp Rated Impulse Withstand Voltage : 8 kV output to case6 kV input to output
• Important Information Attributes
• Persona Type Ids : BM9, EU, LC, OM, OM8, PB, SC, SI, VR
• Persona Type Names : Charge Point Operator, End User, Contractor, Original Equipment Manufacturer, OEM - Control Panelbuilder, Panel Builder, Electrician, System Integrator, IT Channel Partner
• Market Segmentation Id : COMMERCIAL, INDUSTRIAL
• Market Segmentation : Commercial, Industrial
• Control Type : electronic controller, electronic controller
• Marking : UL, CE, UKCA, TÜV
• Connections Terminals : ring lugs 11.7 x 4.5 mm, screw terminals 0.2...3.3 mm², 24 AWG...12 AWG) with cable endscrew terminals 0.5...5.26 mm², 20 AWG...10 AWG) with cable end, screw terminals 0.2...3.3 mm², 24 AWG...12 AWG) without cable endscrew terminals 0.5...8.26 mm², 20 AWG...8 AWG) without cable endforked type tag connectors 9.2 x 4 mm, ring lugs 9.2 x 4 mm, forked type tag connectors 11.7 x 4.5 mm, screw connectors
• Control Circuit Voltage : 4...32 V
• Certificate Agency : UL, CE, UKCA, TÜV, RoHS, REACH
• Carbon Footprint Of The Distribution Phase A4 : 0.019994545454545452, 0 kg CO2 eq.
• Carbon Footprint Of The End Of Life Phase C1 To C4 : 0.08389909090909091, 0.1 kg CO2 eq.
• Carbon Footprint Of The Installation Phase A5 : 0 kg CO2 eq., 0.020679090909090907
• Carbon Footprint Of The Manufacturing Phase A1 To A3 : 2 kg CO2 eq., 2.118636363636363
• Carbon Footprint Of The Use Phase B2 B3 B4 B6 : 2 385 kg CO2 eq., 2384.9437499999995
• Local Data Status : Publishable
• Local Publishable Date : 2026-08-10
• Return Indicator : Y
• Weee Scope : Out
• Scope Perimeter : At least in Europe
• Eoli Availability Display : Yes
• End Of Life Doc Ref : ENVEOLI2308036EN
• Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
• Reach Full Compliance Status Id : CONTAINS_SVHC
• Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
• Rohs Eur In Scope : No
• Rohs Eur Status : Compliant By Exemption
• Rohs Eur Conformity Date : 2418
• Rohs Eur Full Compliance Status : Compliant By Exemption
• China Rohs In Scope : Yes
• China Rohs Label : 5
• With Recycled Cardboard : No
• Without Single Use Plastic : No
• Product Contributes To Saved And Avoided Emissions : No
• Tier Id : 2
• Tier : 2
• Function Option Id : STANDARD
• Function Option : Standard
• Product Kit Identifier : N
• Contacts Type And Composition : 1 NO
• Cos Phi : 0.8-0.8 (with maximum load)
• Device Short Name : SSP1E
• Dielectric Strength : 3.8 kV AC for input/output2 kV AC for output connection
• Insulation Resistance : 500 MOhm at 500 V DC
• Load Current : 0.1-50 A
• Local Signalling : LED, green input
• Mounting Support : panel
• Overvoltage Category : III
• Phase : 1 phase
• Product Availability : Stock - Normally stocked in distribution facility
• Product Or Component Type : solid state relay up to 50 A
• Provided Equipment : thermal pad
• Range Of Product : Easy Harmony Solid State Relays
• Response Time : 0.5 cycle (turn-on)
• Returnability : Yes
• Software Version : v5.9.4
• Sustainable Packaging : No
• Tightening Torque : 1.5...1.7 N.m for input2...2.4 N.m for output
• Total Lifecycle Carbon Footprint : 2 387 kg CO2 eq.
• Database Version : 2022-01
• Data Source : extrapolated product
• Height Nominal : 45 mm
• Width Nominal : 59 mm
• Dv/Dt : 500 V/µs off-state at maximum voltage
• Maximum I²T For Fusing : 1600 A².s for 10 ms at 50 Hz
• Nbr. Of Units In Pkg. : 1
• Customs Code : 8536490080
• Warranty In Months : 18
• Functional Unit Description : SSP Solid State Relays are panel mounted relays that utilise semiconductor switching elements with no moving contacts to provide a complete solid state control and switching solution. Through the following functional units:& 10-Number of phases：1.& 10-rated current [In]：10A.& 10-Control circuit voltage：24-280VAC.
• Functional Unit Quantity : 1
• Functional Unit Unit : Unit
• Reference Lifetime In Y : 8
• Energy Consumption On Product Lifetime In Kwh : 2838.24
• Environment Attributes Main
• Ambient Air Temperature For Operation : -30-80 °C, -30-80 °C
• Ambient Air Temperature For Storage : -30-100 °C, -30-100 °C
• Take Back : No
• Recycled Metal Content At Cr Level : 0 %
• China Rohs Regulation : X
• Mercury Free : Yes
• Carbon Footprint : 2387.1869590909087
• Circularity Profile : ENVEOLI2308036EN
• Environmental Disclosure : ENVPEP2308036EN
• Eu Rohs Directive : Compliant By Exemption
• Ip Degree Of Protection : IP10
• Packaging Made With Recycled Cardboard : No
• Packaging Without Single Use Plastic : No
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• Pep Code : ENVPEP2308036EN
• Pep Verification Date : 2023-08-09
• Pcr Version : PEP-PCR-ed4-2021 09 06
• Psr Version : PSR-0005-ed2-2016 03 29
• Type Of Verification For The Pep : Independent internal review
• General Attributes
• Phase : 1 phase
• Product Or Component Type : solid state relay up to 50 A
• Provided Equipment : thermal pad
• Range Of Product : Easy Harmony Solid State Relays
• ETIM
• ETIM 8 : EC002055
• ETIM 9 : EC002055
• ETIM 10 : EC002055
• Output Attributes
• Output Switching Mode : zero voltage switching
• Solid State Output Type : SCR output
• Surge Protection And Filtering Attributes
• Surge Current : 500 A 1/2 Cycle
• Input Attributes
• Cos Phi : 0.8-0.8 (with maximum load)
• Specifications
• Country of Origin : China
• Weight : 125 g
• Depth : 29 mm
• Overview Attributes
• Device Presentation : complete product