The RMC1VABD is an analog signal conditioner designed to convert voltage analog signals measurement into an isolated current analog signals for seamless integration with industrial automation process control systems. This cost effective signal conditioner that converts a 0(2)…10V signal to a 0(4)...20mA signal. With a 6.2mm ultra-compact design, easy wiring access layout, RMC1VABD simplifies installation, commissioning, and troubleshooting, making it ideal for space-constrained panels and demanding industrial environments. Meets international standards and holds CE, UKCA marking, cULus, and DNV certifications.

• Features
• Engineered to condition and convert isolated analog signals
• Ultra compact size with 6.2mm width, with high accuracy
• Easy diagnostic LEDs, simplify the commissioning, and troubleshooting process
• Wide operating temperature range: -40 to 70°C
• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Physical Attributes
• Wire Stripping Length : 8-9 mm
• Complementary Attributes
• Ui Rated Insulation Voltage : 300 V
• Us Rated Supply Voltage : 24 V DC +30 %...-25 %, isolated
• Important Information Attributes
• Current Consumption : <= 50 mA 24 V, <= 50 mA 24 V<= 50 mA 24 V, <= 50 mA 24 V
• Dielectric Strength : 3 kV AC between the inputs and the supply circuit, between the outputs and the supply circuit, between input and output
• Electromagnetic Compatibility : fast transient bursts - test level: 1 kV criteria A (I/O) conforming to IEC 61000-4-4fast transient bursts - test level: 2 kV criteria A (power lines) conforming to IEC 61000-4-4, radiated RF field immunity test - test level: 10 V/m, 80 MHz...1 GHz criteria A conforming to IEC 61000-4-3, radiated RF field immunity test - test level: 3 V/m, 1.4...6 GHz criteria A conforming to IEC 61000-4-3, conducted radio-frequency immunity test - test level: 10 V, 0.15...80 MHz criteria A conforming to IEC 61000-4-6, magnetic field at power frequency - test level: 30 A/m criteria A conforming to IEC 61000-4-8
• Electromagnetic Emission : conducted emissions CISPR 11, radiated emissions CISPR 11
• Marking : cULus, DNV, CE, UKCA, WEEE, China RoHS
• Measurement Error : +/- 0.1 % of full scale, +/- 0.1 % of full scale
• Protection Type : reverse polarity protection on power supply, overvoltage protection on output, short-circuit protection on output
• Repeat Accuracy : +/- 0.03 %, +/- 0.03 %
• Safety Reliability Data : MTTFd = 347.3 years, B10d = 320583
• Temperature Coefficient : < 100 ppm/°C, < 100 ppm/°C
• Tightening Torque : 0.4-0.5 N.m, 3.5-4.4 lbf.in
• Certificate Agency : cULus, DNV
• Carbon Footprint Of The Distribution Phase A4 : 0.21799948858892537, 0.2 kg CO2 eq.
• Carbon Footprint Of The End Of Life Phase C1 To C4 : 0.1 kg CO2 eq., 0.14715839761044058
• Carbon Footprint Of The Installation Phase A5 : 0.0008031084620051895, 0 kg CO2 eq.
• Carbon Footprint Of The Manufacturing Phase A1 To A3 : 4 kg CO2 eq., 4.1327482689115875
• Carbon Footprint Of The Use Phase B2 B3 B4 B6 : 23 kg CO2 eq., 22.926960627988183
• Local Data Status : Publishable
• Local Publishable Date : 2026-08-10
• Pre Comm Date : 2025-12-01
• Return Indicator : Y
• Weee Applicability : Finished product
• Weee Scope : In
• Weee Product Category : 5
• Scope Perimeter : At least in Europe
• Eoli Availability Display : Yes
• End Of Life Doc Ref : ENVEOLI2511011EN
• Reach Full Compliance Status : Reference contains Substances of Very High Concern above the threshold
• Reach Full Compliance Status Id : CONTAINS_SVHC
• Reach Compliance Directive : Reference contains Substances of Very High Concern above the threshold
• Rohs Eur In Scope : Yes
• Rohs Eur Status : Compliant By Exemption
• Rohs Eur Full Compliance Status : Compliant By Exemption
• China Rohs In Scope : Yes
• China Rohs Label : 5
• With Recycled Cardboard : Yes
• Without Single Use Plastic : Yes
• Product Kit Identifier : N
• Fixing Mode : clip-on (35 mm DIN rail)
• Overvoltage Category : II
• Product Availability : Stock - Normally stocked in distribution facility
• Product Or Component Type : signal conditioner
• Range Of Product : Harmony Analog
• Resistance To Electrostatic Discharge : 6 kV in contact)IEC 61000-4-28 kV in air)IEC 61000-4-2
• Returnability : Yes
• Shock Resistance : 50 gn 11 ms IEC 60068-2-27
• Software Version : v6.2.5-6
• Status Led : 1 LED (Green) PWR (Power Status)
• Sustainable Packaging : Yes
• Total Lifecycle Carbon Footprint : 27 kg CO2 eq.
• Vibration Resistance : 5 gn (f= 10-150 Hz) conforming to IEC 60068-2-6
• Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Database Version : 2024-01
• Data Source : extrapolated product
• Height Nominal : 110 mm
• Width Nominal : 6.2 mm
• Nbr. Of Units In Pkg. : 1
• Customs Code : 8538908180
• Silicone Free : Yes
• Warranty In Months : 18
• Functional Unit Description : This voltage/current converter is part of the harmony analog range. It converts both AC and DC electrical power signals and operates on a 24 V DC supply. The device also extends the connection distance between a sensor and the measurement acquisition system and providing greater installation flexibility. Complies with IEC standards UL and CSA certified which making it suitable for universal applications. Designed for quick, intuitive configuration and it offers ease of use with fixed input and output values aligned with market requirements.
• Functional Unit Quantity : 1
• Functional Unit Unit : unit
• Reference Lifetime In Y : 10
• Recyclability Potential In % : 62
• Environment Attributes Main
• Ambient Air Temperature For Operation : -40-70 °C mounting side by side, -40-70 °C mounting side by side-40-70 °C mounting side by side, -40-70 °C mounting side by side
• Ambient Air Temperature For Storage : -40-85 °C, -40-85 °C
• Take Back : No
• Recycled Metal Content At Cr Level : 0 %
• China Rohs Regulation : X
• Mercury Free : Yes
• Silicon Free : Yes
• Carbon Footprint : 27.425669891561142
• Circularity Profile : ENVEOLI2511011EN
• Environmental Disclosure : "ENVPEP2511011EN"
• Eu Rohs Directive : Compliant By Exemption
• Ip Degree Of Protection : IP20
• Operating Altitude : 0...6561.68 ft (0...2000 m)
• Packaging Made With Recycled Cardboard : Yes
• Packaging Without Single Use Plastic : Yes
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• Relative Humidity : 5-95 %
• Pep Code : "ENVPEP2511011EN"
• Pep Verification Date : 2025-11-11
• Pcr Version : PEP-PCR-ed4-2021 09 06
• Psr Version : PSR-0005-ed3.1-EN-2023 12 08
• Type Of Verification For The Pep : Independent internal review
• General Attributes
• Product Or Component Type : signal conditioner
• Range Of Product : Harmony Analog
• ETIM
• ETIM 8 : EC002046
• ETIM 9 : EC002046
• ETIM 10 : EC002046
• Output Attributes
• Analogue Output Type : current 0...20 mA <= 550 Ohm, current 4...20 mA <= 550 Ohm
• Surge Protection And Filtering Attributes
• Surge Withstand : 1 kV 1.2/50 µs IEC 61000-4-5
• Input Attributes
• Analogue Input Type : voltage 0...10 V DC, voltage 2...10 V DC
• Specifications
• Country of Origin : China
• Weight : 110 g
• Depth : 110 mm