Harmony Control Monitoring and Control Relays (RM17, RM22, RM35) monitor and detect abnormal operating conditions concerning phase ,current, voltage, frequency, speed, or temperature. The relays inform users of abnormal conditions and allow them to initiate the necessary corrective actions before serious and costly breakdown can occur. Harmony phase control relays detect all possible faults occurring in the phases. Harmony voltage and current control relays ensure your equipment is powered with proper values. Harmony frequency control relay monitors frequency variation from your power generation line. The product monitors its own power supply, when the power supply is abnormal, the output relay de-energizes. Harmony pump control relay controls and protects your pump from dry running or overloading. Harmony speed control relay picks up the improper rhythm of your process. Harmony temperature control relay for lift application is a dedicated to elevator temperature monitoring (EN81). Harmony temperature control relays are dedicated to temperature regulation (heating, cooling or heating/cooling of processes). These Harmony relays are available in 17.5 mm, 22.5 mm or 35 mm wide housings and are DIN rail mounted. Applications for these Harmony relays include hoisting, construction cranes, harbor cranes, packaging, construction elevators, passenger elevators, escalators, textile, water and waste water. 0 0 0 0 0 0 0

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : GOST || C-tick || CSA || UL || GL
• Standards : IEC 60255-1
• Dielectric Test Voltage : 2 kV AC 50 Hz, 1 min IEC 60255-5 || 2 kV AC 50 Hz, 1 min IEC 60664-1
• Shock Resistance : 15 gn 11 ms IEC 60255-21-1
• Vibration Resistance : 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6 || 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
• Overvoltage Category : III conforming to IEC 60664-1
• Non-Dissipating Shock Wave : 4 kV IEC 60255-5 || 4 kV IEC 60664-1 || 4 kV IEC 61000-4-5
• Electromagnetic Compatibility : emission standard for industrial environments conforming to IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 || immunity for industrial environments conforming to IEC 61000-6-2
• Ambient Air Temperature For Operation : -20-50 °C
• Marking : CE
• Ip Degree Of Protection : IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)
• Pollution Degree : 3 IEC 60664-1
• Directives : 89/336/EEC - electromagnetic compatibility || 73/23/EEC - low voltage directive
• Ambient Air Temperature For Storage : -40-70 °C
• Relative Humidity : 95-95 % 55-55 °C IEC 60068-2-30
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Minimum Percentage Of Recycled Plastic Content : 0
• Take-Back : No
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 97.651474
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP1504008EN
• Packaging Without Single Use Plastic : Yes
• Scip Number : ba9cbb5b-722a-41d2-b7d0-f60d5f3f104d
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI1504008EN
• Complementary
• Voltage Range : 208...480 V phase to phase
• Minimum Switching Current : 10 mA 5 V DC
• Maximum Measuring Cycle : 150 ms measurement cycle as true rms value
• Hysteresis : 2-2 %
• Operating Rate : <= 360 operations/hour full load
• Switching Capacity In Va : 1250 VA
• Response Time : < 200 ms (in the event of a fault)
• Operating Position : any position without derating
• Utilisation Category : AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1
• Net Weight : 0.13 kg
• Maximum Switching Voltage : 250 V AC || 250 V DC
• Measurement Voltage Limits : 183-528 V AC
• Reset Time : 1500 ms time delay
• Connections - Terminals : screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
• [Ui] Rated Insulation Voltage : 400 V IEC 60664-1
• Mounting Support : 35 mm symmetrical DIN rail conforming to IEC 60715
• Local Signalling : for power ON LED (green) || for relay ON LED (yellow)
• Housing Material : self-extinguishing plastic
• Width : 17.5 mm
• Electrical Durability : 100000 cycles
• Safety Reliability Data : MTTFd = 502.2 years || B10d = 470000
• Control Circuit Voltage Limits : - 12 % + 10 % Un
• Maximum Switching Current : 5 A AC || 5 A DC
• Insulation Resistance : > 500 MOhm 500 V DC IEC 60255-5 || > 500 MOhm 500 V DC IEC 60664-1
• Measurement Error : < 0.05 %/°C with temperature variation || < 1 % over the whole range with voltage variation
• Phase Failure Sensitivity : 0.7 Un
• Power Consumption In Va : 0-22 VA 400 V AC 50 Hz
• Adjustment Of Asymmetry Threshold : 5...15 % of Un selected
• Control Type : without test button
• [Us] Rated Supply Voltage : , self-powered
• Supply Voltage Limits : 183-528 V AC
• Mechanical Durability : 30000000 cycles
• Control Circuit Frequency : 50...60 Hz +/- 10 %
• Threshold Adjustment Voltage : 2...20 % of Un selected || -2...-17 % in the range 220 V AC || +2...+10 % in the range 480 V AC || -2...-12 % in the range 208 V AC
• Tightening Torque : 0.6-1 N.m IEC 60947-1
• Run-Up Delay At Power-Up : 650 ms
• Supply Frequency : 50/60 Hz +/- 10 %
• Repeat Accuracy : 0.5 % input and measurement circuit || 3 % time delay
• Specifications
• Country of Origin : United States
• Width : 17.5 mm
• Weight : 0.13 kg
• Output Contacts : 1 C/O
• Product Or Component Type : 3-phase control relay
• Contacts Type And Composition : 1 C/O
• Nominal Output Current : 5 A
• Product Specific Application : for 3-phase supply
• Time Delay Type : adjustable 0.1...10 s, +/- 10 % of the full scale value Tt- time delay upon fault
• Relay Monitored Parameters : undervoltage and overvoltage in window mode || asymmetry || phase sequence || phase failure detection
• Range Of Product : Harmony Control Relays
• Measurement Range : 208...480 V AC
• Relay Name : RM17TE
• Relay Type : multifunction control relay
• [Uc] Control Circuit Voltage : 208...480 V