This Harmony RM17-UB relay allows monitoring of voltage control in single phase networks. This modular multi function single phase voltage control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market slimmest form-factors with 17.5mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a sealable cover, simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : UL || GL || GOST || C-tick || CSA
• Standards : IEC 60255-6
• Dielectric Test Voltage : 2 kV AC 50 Hz, 1 min IEC 60255-5 || 2 kV AC 50 Hz, 1 min IEC 60664-1
• Shock Resistance : 5 gn IEC 60068-2-27
• Vibration Resistance : 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6 || 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
• Non-Dissipating Shock Wave : 4 kV IEC 60255-5 || 4 kV IEC 60664-1 || 4 kV IEC 61000-4-5
• Electromagnetic Compatibility : emission standard for industrial environments conforming to IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 || immunity for industrial environments conforming to NF EN/IEC 61000-6-2
• Ambient Air Temperature For Operation : -20-50 °C
• Ip Degree Of Protection : IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)
• Pollution Degree : 3 IEC 60664-1
• Directives : 73/23/EEC - low voltage directive || 89/336/EEC - electromagnetic compatibility
• Ambient Air Temperature For Storage : -40-70 °C
• Relative Humidity : 95-95 % 55-55 °C IEC 60068-2-30
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Minimum Percentage Of Recycled Plastic Content : 0
• Take-Back : No
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 37.5633244061
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP1504008EN
• Packaging Without Single Use Plastic : Yes
• Scip Number : 5e3fdf99-611b-4d07-ad17-6eba84ab488b
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI1504008EN
• Complementary
• Minimum Switching Current : 10 mA 5 V DC
• Maximum Measuring Cycle : 150 ms measurement cycle as true rms value
• Hysteresis : 5-5 % fixed threshold setting
• Operating Rate : <= 360 operations/hour full load
• Output Contacts : 1 C/O
• Immunity To Microbreaks : 20 ms
• Polarity : non reversible polarity on DC supply
• Operating Position : any position without derating
• Utilisation Category : AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || DC-14 IEC 60947-5-1
• Net Weight : 0.08 kg
• Maximum Switching Voltage : 250 V AC/DC
• Reset Time : 1500 ms time delay
• Connections - Terminals : screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...2 x 2.5 mm² AWG 24...AWG 12) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
• Run-Up Delay At Power-Up : 1000 ms DC || 500 ms AC
• [Ui] Rated Insulation Voltage : 250 V IEC 60664-1 || 400 V IEC 60664-1
• Overvoltage Category : III conforming to IEC 60664-1
• Quality Labels : CE
• Mounting Support : 35 mm symmetrical DIN rail conforming to IEC 60715
• Nominal Output Current : 5 A
• Local Signalling : for power ON LED (green) || for relay ON LED (yellow)
• Housing Material : self-extinguishing plastic
• Measurement Accuracy : +/- 10 % of the full scale value
• Width : 17.5 mm
• Maximum Power Consumption In W : 1 W DC
• Electrical Durability : 100000 cycles
• Repeat Accuracy : +/- 0.5 % input and measurement circuit || +/- 1 % time delay
• Safety Reliability Data : B10d = 470000 || MTTFd = 502.2 years
• Maximum Switching Current : 5 A AC/DC
• Insulation Resistance : > 500 MOhm 500 V DC IEC 60255-5 || > 500 MOhm 500 V DC IEC 60664-1
• Measurement Error : < 1 % over the whole range with voltage variation || 0.2 %/°C with temperature variation
• Power Consumption In Va : 0-3 VA AC
• Control Type : without test button
• [Us] Rated Supply Voltage : , self-powered
• Supply Voltage Limits : 50-270 V AC/DC
• Mechanical Durability : 30000000 cycles
• Control Circuit Frequency : 50...60 Hz +/- 10 %
• Tightening Torque : 0.6-1 N.m IEC 60947-1
• Specifications
• Country of Origin : United States
• Width : 17.5 mm
• Weight : 0.08 kg
• Switching Capacity In Va : 1250 VA
• Product Or Component Type : voltage control relay
• Contacts Type And Composition : 1 C/O
• Product Specific Application : for single-phase and DC supply
• Time Delay Type : adjustable 0.1...10 s, 0 + 10 % Tt- time delay upon fault
• Relay Monitored Parameters : overvoltage and undervoltage detection
• Range Of Product : Harmony Control Relays
• Measurement Range : 65...260 V AC/DC
• Relay Name : RM17UBE
• Relay Type : voltage control relay