Harmony Plug in Relays is a complete range of general purpose industrial relays, sockets and accessories. Harmony plug in relays optimize design flexibility, expedite installation and simplify maintenance with 8 to 30 A load ratings, multiple contact combinations, a wide range of coil voltages, and full feature covers. The Harmony plug in relays have a test button which allows users to check circuits for proper operation. They have lock down door holds contacts in place to test circuits during maintenance. A standard mechanical flag indicates relay status. An optional bipolar LED indicates operation when relay is energized. Most of these relays plug into a relay socket that can be DIN rail mounted or panel mounted. Harmony plug in relays are UL Listed. A green LED on the front will illuminate when the relay is on. Status display with LED: clearly signal both in the day and night. Its design is fit for industrial machines, packaging, textile, HVAC, automation control panels, low/medium voltage switchgear, motor controls, PLC Interfaces, power supplies, building or medical equipment, lighting controls. It conforms to international standards and certifications like IEC, CE, UL, CSA, EAC, Lloyd's, RoHS and REACH. RXM Relay should be used with a RXZE socket (screw clamp, screw connector, push-in terminal). To protect against vibrations, plastic/metal clamp can be added to the socket. Protection modules and marking legend are also available. It is sold in lots of 10 and reference includes relay only. The RXM plug-in relays are a series of industrial plug-in relays designed for both simple and complex automation systems and available with 2 CO (12A), 3 CO (10A), 4 CO (6A) contacts, 4 CO (3A) low level contacts.

• Prop 65
• WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environment
• Product Certifications : UL || Lloyd's || CE || CSA || GOST || IECEE CB Scheme
• Standards : CSA C22.2 No 14 || UL 508 || IEC 61810-1
• Ambient Air Temperature For Operation : -40-55 °C
• Vibration Resistance : 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
• Shock Resistance : 10 gnin operation || 30 gnnot operating
• Ip Degree Of Protection : IP40 conforming to IEC 60529
• Ambient Air Temperature For Storage : -40-85 °C
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Packaging Made With Recycled Cardboard : Yes
• Environmental Disclosure : ENVPEP2106019EN
• Packaging Without Single Use Plastic : Yes
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Minimum Percentage Of Recycled Plastic Content : 0
• Circularity Profile : ENVEOLI2106019EN
• Take-Back : No
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 22.4827489651
• Complementary
• Utilisation Coefficient : 20 %
• Maximum Switching Capacity : 1500 VA/168 W
• Safety Reliability Data : B10d = 100000
• Average Consumption : 1.2 VA 60 Hz
• Operating Rate : <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
• Protection Category : RT I
• Test Levels : level A group mounting
• Contacts Material : AgNi
• Pollution Degree : 2
• Reset Time : 20 ms
• Shape Of Pin : flat (faston type)
• Dielectric Strength : 1300 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with basic insulation || 2000 V AC between poles with basic insulation
• Net Weight : 0.037 kg
• Cad Overall Height : 82.8 mm
• Maximum Switching Voltage : 250 V IEC
• Average Resistance : 4430 Ohm 20 °C +/- 15 %
• Device Presentation : complete product
• Rated Operational Voltage Limits : 96...132 V AC
• [Ie] Rated Operational Current : 3 A 28 V DC) NC IEC || 3 A 250 V AC) NC IEC || 6 A 28 V DC) NO IEC || 6 A 250 V AC) NO IEC || 6 A 277 V AC) UL || 8 A 30 V DC) UL
• [Ui] Rated Insulation Voltage : 250 V IEC || 300 V CSA || 300 V UL
• Electrical Durability : 100000 cycles resistive
• Mechanical Durability : 10000000 cycles
• Compatibility Code : RXM
• Operating Position : any position
• Operating Time : 20 ms
• Load Current : 6 A 250 V AC || 6 A 28 V DC
• Drop-Out Voltage Threshold : >= 0.15 Uc
• [Uimp] Rated Impulse Withstand Voltage : 2.5 kV 1.2/50 µs
• Minimum Switching Capacity : 170 mW 10 mA, 17 V
• Cad Overall Depth : 80.35 mm
• Average Coil Consumption In Va : 1.2-1.2 60 Hz
• Specifications
• Country of Origin : China
• Height : 82.8 mm
• Weight : 0.037 kg
• [Uc] Control Circuit Voltage : 120 V AC 50/60 Hz
• Range Of Product : Harmony Electromechanical Relays
• Continuous Output Current : 5 A
• Product Or Component Type : plug-in relay
• Status Led : with
• Control Type : lockable test button
• Series Name : RXM series
• Contacts Type And Composition : 4 C/O
• Relay Type : miniature relay
• [Ithe] Conventional Enclosed Thermal Current : 6 A