analog input kit, Modicon STB, standard, +/- 10V, 2 I, 11bits with sign

ANALOG -/+10V IN 2CH KIT

SQDSTBAVI1270K STBAVI1270K 3595863988918
419.21 / EA
http://schema.org/OutOfStock
Mayer-DDS-analog input kit, Modicon STB, standard, +/- 10V, 2 I, 11bits with sign-1
  • Country of Origin: USA
  • Net Weight: 0.115 kg
  • Warranty Length: 18 mth
  • Weight: 0.115 kg
QTY
  • Features
  • Specifications
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Environment
    • Product Certifications : CSA || C-tick || UL || ATEX Cat 3G || FM Class 1 Division 2
    • Shock Resistance : 30 gn 11 ms IEC 88 reference 2-27
    • Vibration Resistance : +/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail
    • Ip Degree Of Protection : IP20 conforming to IEC 61131-2 class 1
    • Pollution Degree : 2 IEC 60664-1
    • Ambient Air Temperature For Storage : -40-85 °C without derating
    • Relative Humidity : 95-95 % 60-60 °C without condensation
    • Operating Altitude : <= 6561.68 ft (2000 m)
    • Ambient Air Temperature For Operation : 32...140 °F without derating
  • Contractual warranty
    • Warranty : 18 months
  • Environmental data
    • Packaging Made With Recycled Cardboard : No
    • Packaging Without Single Use Plastic : No
    • Scip Number : 6830dd70-e4bc-47df-85c7-e41f888576f4
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • Weee : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Minimum Percentage Of Recycled Plastic Content : 0
    • Take-Back : No
  • Complementary
    • Insulation Between Channels And Logic Bus : 1500 V for 1 minute
    • Cold Swapping : yes
    • Maximum Supply Current For Sensors : 100 mA per input channels
    • Input Impedance : 400 kOhm
    • Insulation Between Channels And Sensor Bus : 30 V
    • Status Led : 1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
    • Hot Swapping Fallback : yes for standard NIMs
    • Differential Linearity : monotonic
    • Integral Linearity : +/- 0.2 %FS
    • Supply : power distribution module
    • Data Format : IEC 61131-2 || EN 61131-2
    • Current Consumption : 30 mA 5 V DC logic bus
    • Marking : CE
    • Net Weight : 0.115 kg
    • Fallback Status : state 0 basic NIMs || user configurable standard NIMs
    • Temperature Drift : +/-0.01 %/°C
    • Addressing Requirement : 4 input words
    • Absolute Accuracy Error : +/- 0.5 % of full scale 25 °C
    • Response Time : 5 ms
    • Absolute Maximum Input : 50 V DC
    • Maximum Source Impedance : 1 kOhm
    • Protection Type : short-circuit protection
    • Update Time : 10 ms
    • Overvoltage Category : II
    • Product Compatibility : mounting base STBXBA1000 || power distribution module STBPDT3100/3105
    • [Us] Rated Supply Voltage : 24 V DC
  • Specifications
    • Country of Origin : United States
    • Weight : 0.115 kg
    • Range Of Product : Modicon STB distributed I/O solution
    • Type Of Filter : single low pass input filter 25 Hz
    • Product Or Component Type : standard analog input kit
    • Analogue Input Number : 2
    • Analogue Input Resolution : 11 bits + sign
    • Kit Composition : STBXBA1000 base || STBXTS1100, 6-terminal screw type connector || STBAVI1270 module || STBXTS2100, 6-terminal spring clamp connector
    • Analogue Input Type : voltage +/- 10 V