This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 10Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 11.5kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.

• Prop 65
• WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Environmental data
• Packaging Made With Recycled Cardboard : No
• Packaging Without Single Use Plastic : No
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Minimum Percentage Of Recycled Plastic Content : 0
• Take-Back : No
• Complementary
• Height : 640 mm
• Protection Type : thermal protection via drive or temperature control switch 120 °C
• Net Weight : 9 kg
• Electrical Connection : terminal <= 35 mm² / AWG 3 drive || terminal <= 4 mm² / AWG 10 temperature control switch
• Product Compatibility : variable speed drive ATV930 wall mount 37 kW 380...480 V medium cycle || variable speed drive ATV930 wall mount 45 kW 380...480 V medium cycle || variable speed drive ATV950 wall mount 37 kW 380...480 V medium cycle || variable speed drive ATV950 wall mount 45 kW 380...480 V medium cycle || variable speed drive ATV930 wall mount 11 kW 200...240 V severe cycle || variable speed drive ATV340 30 kW 380...480 V medium cycle || variable speed drive ATV340 37 kW 380...480 V medium cycle
• Duty Cycle : severe cycle (heavy duty) <54 s braking with 100 % braking torque for a 120 s cycle || medium cycle (normal duty) <4 s braking with 135 % braking torque for a 40 s cycle || medium cycle (heavy duty) <4 s braking with 165 % braking torque for a 40 s cycle || severe cycle (heavy duty) <6 s braking with 165 % braking torque for a 120 s cycle
• Width : 390 mm
• Depth : 180 mm
• Average Power Available : 2.9 kW 50 °C
• Specifications
• Country of Origin : Germany
• Width : 390 mm
• Height : 640 mm
• Weight : 9 kg
• Ohmic Value : 10 Ohm
• [Ue] Rated Operational Voltage : 24 V DC || 250 V AC
• Product Or Component Type : braking resistor
• Range Compatibility : Altivar Machine ATV340 || Altivar Process ATV900
• Environment
• Ambient Air Temperature For Operation : 0-50 °C
• Ambient Air Temperature For Storage : -25-70 °C
• Ip Degree Of Protection : IP20