soft starter for asynchronous motor, Altistart U01, TeSys U, ATSU01, 12A, 200 to 480V, 2.2 to 5.5kW

SOFT START 200-480VAC 12A ATS0

SQDATSU01N212LT ATSU01N212LT 3389110667103
317.47 / EA
http://schema.org/OutOfStock
Mayer-DDS-soft starter for asynchronous motor, Altistart U01, TeSys U, ATSU01, 12A, 200 to 480V, 2.2 to 5.5kW-1
  • Country of Origin: Germany
  • Warranty Length: 18 mth
The Altistart U01 is a soft start/soft stop unit for 3-phase asynchronous motors. It is designed primarily for combinations with TeSys U starter-controllers. It can be used for a motor rated power up to 3kW or 7.5hp for 3-phase (200V to 480V AC) and up to 12A rating. It is 45mm wide, this makes it one of the smallest soft starters on the market. It can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Its protection index is IP20. It weighs 0.34kg and its dimensions are, 45mm wide, 234mm high, 150mm deep. The Altistart U01 is designed for the following simple applications like conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It complies with standards IEC/EN 60947-4-2, and carries UL, CSA, C-Tick, and CCC certifications, and CE marking. It can be easily combined with a TeSys U controller by means of the power connector VW3G4104. It is easy to install on a DIN rail. Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency. Reduced machine wear and minimized maintenance time will optimize operations. Together with TeSys Model U, it provides a unique motor starter solution.
QTY
  • Product Description
  • Features
  • Specifications
The Altistart U01 is a soft start/soft stop unit for 3-phase asynchronous motors. It is designed primarily for combinations with TeSys U starter-controllers. It can be used for a motor rated power up to 3kW or 7.5hp for 3-phase (200V to 480V AC) and up to 12A rating. It is 45mm wide, this makes it one of the smallest soft starters on the market. It can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Its protection index is IP20. It weighs 0.34kg and its dimensions are, 45mm wide, 234mm high, 150mm deep. The Altistart U01 is designed for the following simple applications like conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It complies with standards IEC/EN 60947-4-2, and carries UL, CSA, C-Tick, and CCC certifications, and CE marking. It can be easily combined with a TeSys U controller by means of the power connector VW3G4104. It is easy to install on a DIN rail. Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency. Reduced machine wear and minimized maintenance time will optimize operations. Together with TeSys Model U, it provides a unique motor starter solution.
  • Ambient Air Temperature For Storage
    • -25-70 °C EN/IEC 60947-4-2
  • Power Range
    • 2.2-3 kW 200-240 V 3 phase
    • 4-6 kW 380-440 V 3 phase
  • US Rated Supply Voltage
    • 200...480 V - 10...10 %
  • CAD
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATS01N206LUA&p_File_name=ATS01N206LUA.dwg
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATS01N206LUA&p_File_name=ATS01N206LUA.dxf
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATS01N206LUF&p_File_name=ATS01N206LUF.dwg
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATS01N206LUF&p_File_name=ATS01N206LUF.dxf
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATS01N206LUT&p_File_name=ATS01N206LUT.dwg
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATS01N206LUT&p_File_name=ATS01N206LUT.dxf
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATSU01N212LT_CAD&p_File_name=ATSU01N212LT_3D.stp
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATSU01N212LT_CAD&p_File_name=ATSU01N212LT_2D Front View.dwg
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATSU01N212LT_CAD&p_File_name=ATSU01N212LT_2D Front View.dxf
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATSU01N212LT_CAD&p_File_name=ATSU01N212LT_2D Right Side View.dwg
    • https://download.schneider-electric.com/files?p_Doc_Ref=ATSU01N212LT_CAD&p_File_name=ATSU01N212LT_2D Right Side View.dxf
  • Prop 65
    • WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Maximum Switching Voltage
    • 440 V relay outputs
  • Discrete Input Type
    • logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
  • Electrical Connection
    • 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
    • screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit
    • 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
    • screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
    • screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
    • 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
    • screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
    • 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
    • 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
    • screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
  • UC Control Circuit Voltage
    • 24 V DC +/- 10 %
  • Maximum Switching Current
    • relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
    • relay outputs 2 A 250 V AC AC-15 cos phi = 0.5 20 ms inductive
  • Maximum Horse Power Rating
    • 3 hp, 3 phase 230 V
    • 7.5 hp, 3 phase 460 V
  • Vibration Resistance
    • 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
    • 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
  • Discrete Output Current
    • 2 A DC-13
    • 3 A AC-15
  • Motor Power KW
    • 2.2 kW, 3 phase 230 V
    • 5.5 kW, 3 phase 400 V
    • 3 kW, 3 phase 230 V
  • Electromagnetic Compatibility
    • conducted and radiated emissions level B conforming to CISPR 11
    • conducted and radiated emissions level B conforming to IEC 60947-4-2
    • damped oscillating waves level 3 conforming to IEC 61000-4-12
    • electrostatic discharge level 3 conforming to IEC 61000-4-2
    • EMC immunity conforming to EN 50082-1
    • EMC immunity level B conforming to EN 50082-2
    • harmonics level 3 conforming to IEC 1000-3-2
    • harmonics level 3 conforming to IEC 1000-3-4
    • immunity to electrical transients level 4 conforming to IEC 61000-4-4
    • immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
    • voltage/current impulse level 3 conforming to IEC 61000-4-5
    • conducted and radiated emissions level 3 conforming to IEC 61000-4-6
    • immunity to conducted interference caused by radio-electrical fields level 4 conforming to IEC 61000-4-11
  • Supply Frequency
    • 50...60 Hz - 5...5 %
  • Display Type
    • 1 LED Green)starter powered up
    • 1 LED Yellow)nominal voltage reached
  • Relative Humidity
    • 5-95 % without condensation or dripping water EN/IEC 60068-2-3
  • Minimum Switching Current
    • 10 mA 6 V DC relay outputs
  • Operating Altitude
    • <= 3280.84 ft (1000 m) without derating
    • > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
  • Utilisation Category
    • AC-53B EN/IEC 60947-4-2
  • Discrete Input Logic
    • positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
  • Discrete Output Type
    • open collector logic LO1 end of starting signal
    • relay outputs R1A, R1C NO
  • Starting Time
    • 1 s / 100
    • 5 s / 20
    • 10 s / 10
    • adjustable from 1 to 10 s
  • Shock Resistance
    • 15 gn 11 ms EN/IEC 60068-2-27
  • Power Dissipation In W
    • 1.5 W at full load and at end of starting
    • 121.5 W in transient state
  • Ambient Air Temperature For Operation
    • -10-40 °C (without derating)
    • 40-50 °C (with current derating of 2 % per °C)
  • UE Rated Operational Voltage
    • 230 V 2.2 kW
    • 400 V 5.5 kW
    • 230 V 3 kW
    • 230 V 3 hp
    • 460 V 7.5 hp
  • Discrete Output Voltage
    • 24 V 6...30 V) open collector logic
  • Important Information Attributes
    • Local Data Status : Publishable
    • Local Publishable Date : 2025-07-10
    • HTML Description : Altistart 01 Soft Start (ATSU01)For Asynchronous MotorUS Rated Supply Voltage: 180-528VIcL Starter Rating: 12AMotor Power Horsepower: 3-7.5 HPMotor Power kW: 2.2-5.5 kWNetwork Number of Phases: Triple-phaseIntegrated BypassAssembly Style: with Heat Sink
    • Manufacturer : Schneider Electric
    • Device Type : Soft starter - Soft starter
    • Serviceability : No
    • Traceability : Yes
    • Field Service Division : IDIBS
    • Average Life Duration : 10 year(s)
    • Legacy WEEE Scope : In
    • WEEE Product Category : 5
    • Scope Perimeter : At least in Europe
    • Reach Full Compliance Status : Free of Substances of Very High Concern above the threshold
    • Reach Full Compliance Status Id : NOT_CONTAINING_SVHC
    • Reach Compliance Directive : Free of Substances of Very High Concern above the threshold
    • ROHS EUR In Scope : No
    • ROHS EUR Status : Compliant
    • ROHS EUR Conformity Date : 1927
    • ROHS EUR Full Compliance Status : Pro-active compliance (Product out of EU RoHS legal scope)
    • ROHS EUR Full Compliance Status Id : PRO_ACTIVE_COMPLIANCE
    • China ROHS In Scope : Yes
    • China ROHS Label : 1
    • With Recycled Cardboard : Yes
    • Without Single Use Plastic : Yes
    • Product Contributes To Saved And Avoided Emissions : No
    • Return Indicator : Y
    • WD Status : 1 - GSC certified
    • Assembly Style : with heat sink
    • Current Consumption : 65 mA
    • Deceleration Time Symb : adjustable from 1 to 10 s
    • Device Short Name : ATSU01
    • ICL Starter Rating : 12 A
    • Motor Starter Type : soft starter
    • Package Weight Lbs : 453.0 g
    • Product Availability : Non-Stock - Not normally stocked in distribution facility
    • Product Or Component Type : soft starter
    • Product Specific Application : simple machine
    • Range Of Product : Altistart U01 and TeSys U
    • Returnability : Yes
    • Starting Torque : 30...80 % of starting torque of motor connected directly on the line supply
    • Sustainable Packaging : Yes
    • Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    • Relationship Type : Compatible relationship
    • Accessories : VW3G4104
    • Nbr Of Units In Pkg : 1
    • Warranty In Months : 18
  • General Attributes
    • Product Or Component Type : soft starter
    • Range Of Product : Altistart U01 and TeSys U
  • Environment Attributes
    • ROHS Exemption Information : Yes
    • China ROHS url : https://checkaproduct.se.com/DistantRequestDispatcher.aspx?action=exportPdfRoHSChina&pid=715324&lang=en-us
    • Take Back : No
    • Reach Free SHVC : Yes
    • Recycled Metal Content At Cr Level : 0 %
    • China ROHS Regulation : X
    • Toxic Heavy Metal Free : Yes
    • Mercury Free : Yes
    • EU ROHS Directive : Pro-active compliance (Product out of EU RoHS legal scope)
    • IP Degree Of Protection : IP20
    • Packaging Made With Recycled Cardboard : Yes
    • Packaging Without Single Use Plastic : Yes
    • Reach Free Of SVHC : Yes
    • Reach Regulation : Free of Substances of Very High Concern above the threshold
  • Contractual Warranty Attributes
    • Warranty Period : 18 months
    • Warranty : 18 months
  • Input Attributes
    • Input Output Isolation : galvanic between power and control
  • Specifications
    • Country of Origin : Germany