Pump Panel, NEMA Type S, Well Guard, oil field, Size 1, 27A, 10HP, 30A fusible disconnect, melting alloy overload, 440/480VAC 50/60Hz coil, NEMA 3R

PUMP PANEL 480VAC 27AMP NEMA +

SQD8940WC3S2V06Y61 8940WC3S2V06Y61 785901025818
2181.67 / EACH
http://schema.org/OutOfStock
Mayer-DDS-Pump Panel, NEMA Type S, Well Guard, oil field, Size 1, 27A, 10HP, 30A fusible disconnect, melting alloy overload, 440/480VAC 50/60Hz coil, NEMA 3R-1
  • Certifications: NEMA, UL Listed
  • Depth: 239 mm
  • Fuse Type: H Or K
  • Height: 978 mm
  • Line Rated Current: 27 A
  • Mounting Type: Surface
  • Number of Poles: 3
  • Warranty Length: 18 mth
  • Width: 519 mm
Well-Guard pumping plant panels are designed for pumping applications. This panel is specifically designed for oil field applications. These panels provide extra space for field installation of auxilliary equipment. These panels us Type S non-reversing magnetic starters. Panel has a 30A fusible disconnect switch. This NEMA Size 1 starter has a 10 HP at 480 VAC three phase rating and has a maximum rating of 30 Amperes. This 3 pole starter is for three phase applications. The starters in these panels are available with a wide variety of replaceable coil voltages. The starter in this device has a 440/480 VAC 50/60 Hz operating coil wired for common control. This Well-Guard pump panel has a Motor Logic overload relay to sense over current conditions. A painted sheet steel NEMA 3R rainproof enclosure is used to protect this starter. Enclosure is 38.50 inches tall, 19.00 inches wide and 9.39 inches deep. A wide variety of accessories are available for Type S starters. This pump panel is supplied with a HAND/OFF/AUTO selector switch. These NEMA pump panels with Type S starters are UL listed and marked Suitable for use as Service Equipment. They are also CSA certified.
QTY
  • Product Description
  • Specifications
Well-Guard pumping plant panels are designed for pumping applications. This panel is specifically designed for oil field applications. These panels provide extra space for field installation of auxilliary equipment. These panels us Type S non-reversing magnetic starters. Panel has a 30A fusible disconnect switch. This NEMA Size 1 starter has a 10 HP at 480 VAC three phase rating and has a maximum rating of 30 Amperes. This 3 pole starter is for three phase applications. The starters in these panels are available with a wide variety of replaceable coil voltages. The starter in this device has a 440/480 VAC 50/60 Hz operating coil wired for common control. This Well-Guard pump panel has a Motor Logic overload relay to sense over current conditions. A painted sheet steel NEMA 3R rainproof enclosure is used to protect this starter. Enclosure is 38.50 inches tall, 19.00 inches wide and 9.39 inches deep. A wide variety of accessories are available for Type S starters. This pump panel is supplied with a HAND/OFF/AUTO selector switch. These NEMA pump panels with Type S starters are UL listed and marked Suitable for use as Service Equipment. They are also CSA certified.
  • Environment
    • Product Certifications : UL Listed || NEMA
    • Enclosure Type : rainproof enclosure indoor/outdoor
    • Nema Degree Of Protection : NEMA 3R
  • Contractual warranty
    • Warranty : 18 months
  • Offer Sustainability
    • California Proposition 65 : WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    • China Rohs Regulation : Product out of China RoHS scope. Substance declaration for your information.
    • Eu Rohs Directive : Not compliant
  • Complementary
    • Thermal Overload Type : Motor Logic solid state class 10/20
    • Disconnector Device Type : fusible disconnect switch
    • Height : 978 mm
    • Control Type : selector switch HAND-OFF-AUTO)
    • Nema Size : 1
    • Device Mounting : surface
    • Maximum Horse Power Rating : 10-10 hp 480 V AC, 3 phase
    • [Uc] Control Circuit Voltage : 480 V AC 60 Hz || 440 V AC 50 Hz
    • Permissible Voltage : 600 V AC
    • Fuse Type : H or K
    • Electrical Connection : screw terminal
    • Line Rated Current : 27 A
    • Protection Type : overload
    • Control Circuit : common control circuit
    • Width : 519 mm
    • Depth : 239 mm
    • Associated Fuse Rating : 30 A
    • Number Of Poles : 3
  • Specifications
    • Product Name : Well-Guard Control
    • Device Application : pumping
    • Device Short Name : S2