TeSys U reversing module for side mounting, for the constitution of TeSys U reversing starter controllers. It provides reverse power contacts, coil control with interlocking capabilities to be supplied with 110-240V AC / 110-220V DC. To be used with an advanced power base LUB120, LUB320, or LUB380 equipped with a Control Unit LUC*FU type. To be associated with an assembling connector LU9MR1 and a control terminal block LU9M1 to complete the side mounting.

• Prop 65
• WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

• Environment
• Ambient Air Temperature For Operation : -25-60 °C with LUCM || -25-70 °C with LUCA, LUCB, LUCC, LUCD
• Resistance To Radiated Fields : 10 V/m level 3 IEC 61000-4-3
• Non-Dissipating Shock Wave : 1 kV serial mode IEC 60947-6-2 || 2 kV common mode IEC 60947-6-2
• Shock Resistance : 10 gn power poles open IEC 60068-2-27 || 15 gn power poles closed IEC 60068-2-27
• Vibration Resistance : 2 gn 5-300 Hz) power poles open IEC 60068-2-27 || 4 gn 5-300 Hz) power poles closed IEC 60068-2-27
• Ambient Air Temperature For Storage : -40-85 °C
• Protective Treatment : TH IEC 60068
• Ip Degree Of Protection : IP20 IEC 60947-1 front panel and wired terminals) || IP20 IEC 60947-1 other faces) || IP40 IEC 60947-1 front panel outside connection zone)
• Resistance To Electrostatic Discharge : 8 kV level 3, in open air IEC 61000-4-2 || 8 kV level 4, on contact IEC 61000-4-2
• Operating Altitude : 6561.68 ft (2000 m)
• Fire Resistance : 960 °C parts supporting live components IEC 60695-2-12 || 650 °C IEC 60695-2-12
• Immunity To Radioelectric Fields : 10 V IEC 61000-4-6
• Resistance To Fast Transients : 2 kV 3 serial link IEC 61000-4-4 || 4 kV 4 all circuits except for serial link IEC 61000-4-4
• Contractual warranty
• Warranty : 18 months
• Environmental data
• Rohs Exemption Information : Yes
• Packaging Made With Recycled Cardboard : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP2407003EN
• Packaging Without Single Use Plastic : Yes
• Weee Label : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• Scip Number : ea04e023-7196-4d5e-a41f-a711a93b86d7
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
• Circularity Profile : ENVEOLI2407003EN
• Take-Back : No
• Carbon Footprint Of The Use Phase [B2, B3, B4, B6] : 0
• Carbon Footprint Of The Manufacturing Phase [A1 To A3] : 3.01486868935686
• Carbon Footprint Of The Distribution Phase [A4] : 0.2 kg CO2 eq.
• Carbon Footprint Of The Installation Phase [A5] : 0 kg CO2 eq.
• Sustainable Packaging : Yes
• Total Lifecycle Carbon Footprint : 4 kg CO2 eq.
• Eu Rohs Directive : Compliant with Exemptions
• Carbon Footprint Of The End-Of-Life Phase [C1 To C4] : 1.1227030942588685
• Carbon Footprint (Kg Co2 Eq, Total Life Cycle) : 4.4057586001568945
• Complementary
• Product Certifications : CE || UL || CSA || CCC || EAC || ASEFA || ATEX || Marine
• [Ue] Rated Operational Voltage : 690 V AC power circuit
• Height : 115 mm
• Connections - Terminals : control circuit screw clamp terminals 1 0.34-1.5 mm² 3 mm) flexible with cable end || control circuit screw clamp terminals 1 0.75-1.5 mm² 3 mm) flexible without cable end || control circuit screw clamp terminals 1 0.75-1.5 mm² 3 mm) rigid || control circuit screw clamp terminals 2 0.34-1.5 mm² 3 mm) flexible with cable end || control circuit screw clamp terminals 2 0.75-1.5 mm² 3 mm) flexible without cable end || control circuit screw clamp terminals 2 0.75-1.5 mm² 3 mm) rigid || power circuit screw clamp terminals 1 1-10 mm² 4 mm) rigid || power circuit screw clamp terminals 1 1-6 mm² 4 mm) flexible with cable end || power circuit screw clamp terminals 1 2.5-10 mm² 4 mm) flexible without cable end || power circuit screw clamp terminals 2 1-6 mm² 4 mm) flexible with cable end || power circuit screw clamp terminals 2 1-6 mm² 4 mm) rigid || power circuit screw clamp terminals 2 1.5-6 mm² 4 mm) flexible without cable end
• Net Weight : 0.425 kg
• Fixing Mode : clipped (DIN rail) || screw-fixed (plate)
• [Uimp] Rated Impulse Withstand Voltage : 6 kVIEC 60947-6-2
• Inrush Restraint Duration : 25 ms AC || 15 ms DC
• Standards : EN 60947-6-2 || IEC 60947-6-2 || UL 60947-4-1, with phase barrier || CSA C22.2 No 60947-4-1, with phase barrier
• [Ui] Rated Insulation Voltage : 690 V IEC 60947-6-2 || 600 V UL 60947-4-1 || 600 V CSA C22.2 No 60947-4-1
• Compatibility Code : LU6MB
• Operating Time : 150 ms with change of direction || 75 ms without change of direction
• Width : 45 mm
• Tightening Torque : control circuit: 0.8-1.2 N.m flat screwdriver 5 mm || control circuit: 0.8-1.2 N.m Philips No 2 screwdriver 5 mm || power circuit: 1.9-2.5 N.m flat screwdriver 6 mm || power circuit: 1.9-2.5 N.m Philips No 2 screwdriver 6 mm || power circuit: 1.9-2.5 N.m pozidriv No 2 screwdriver 6 mm
• Depth : 113 mm
• Network Frequency : 40...60 Hz
• Specifications
• Country of Origin : France
• Width : 45 mm
• Height : 115 mm
• Weight : 0.425 kg
• Device Mounting : separate mounting
• [Uc] Control Circuit Voltage : 110...240 V AC 50/60 Hz || 110...220 V DC
• Product Or Component Type : reverser block
• Current Consumption : 1000 mA 110...220 V DC I maximum while closing || 1000 mA 110...240 V AC I maximum while closing
• Range : TeSys
• [Ie] Rated Operational Current : 38 A
• Device Application : motor control
• Device Short Name : LU6MB