Appleton™ EY 25% Fill Vertical and Horizontal Conduit Sealing Fittings - PN EYF75

SEAL - 3/4 MALL COND

APPEYF75 EYF-75 781381135122
35.99 / Each
http://schema.org/OutOfStock
Mayer-DDS-Appleton™ EY 25% Fill Vertical and Horizontal Conduit Sealing Fittings - PN EYF75-1
Appleton™ EY 25% fill vertical and horizontal conduit sealing fittings prevent the passage of gases, vapors or flames from one portion of a conduit system to another. They also restrict large amounts of ignitable gases or vapors from accumulating to confine explosive pressure. Appleton sealing fittings are explosionproof, dust-ignitionproof and raintight. They are suitable for use in Class I and II locations.
QTY
  • Product Description
  • Features
  • Specifications
Appleton™ EY 25% fill vertical and horizontal conduit sealing fittings prevent the passage of gases, vapors or flames from one portion of a conduit system to another. They also restrict large amounts of ignitable gases or vapors from accumulating to confine explosive pressure. Appleton sealing fittings are explosionproof, dust-ignitionproof and raintight. They are suitable for use in Class I and II locations.
  • Features
    • Explosionproof, dust-ignitionproof, raintight
    • Prevent passage of gases, vapors or flames from one portion of conduit system to another. Restrict any explosion to the sealed off enclosure. Prevent pressure piling within conduit system
    • Required in Class I, Division 1 and 2 locations within 18" of enclosures containing apparatus that may cause arcs, sparks or high temperatures
    • Required in Class I, Division 1 and 2 locations where 2" or larger conduit enters enclosure, fitting housing terminals, splices or taps
    • Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
    • Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36" or less conduit. Seal must be located within 18" of either enclosure
    • Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations
    • Smooth, rounded integral bushing in each hub protects conductor insulation
    • Accurately tapped, tapered threads for tight, rigid joints and ground continuity
    • Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
    • UL Listed for use with Kwiko™ A Sealing Compound. Also listed with certain competitors sealing cement, contact factory for details
    • Close radius type for sealing vertical or horizontal conduit runs
  • Certifications and Compliances
    • NEC/CEC Certifications and Compliances : Class I, Division 1 and 2, Groups A, B, C, D; Class II, Division 1 and 2, Groups E, F, G; Class III
  • Specifications
    • Standard Material and Finishes : Malleable iron with triple-coat finish (1) zinc electroplate, (2) chromate, and (3) epoxy powder coat, or Almag 35 aluminum with epoxy powder coat