BRIDGEPORT

EMT Pull Elbow Connector 1/2", Zinc, For 90˚ Bends, With Cover

PULL ELBOW 1/2IN RGD/SS EMT

BRG61DC 61-DC 781747090614
0.00 / Each
http://schema.org/OutOfStock
Mayer-DDS-EMT Pull Elbow Connector 1/2", Zinc, For 90˚ Bends, With Cover-1
  • Country of Origin: India
  • Finish: Ball Burnished, Mirror Smooth, Zinc Electro-Plated
  • Length: 1.312 in
  • Material: Die-Cast Zinc
  • Warranty Length: 1 yr
  • Weight: 19.8 lb
The Bridgeport 61-DC 1/2" EMT Pull Elbow is used to make 90° turns in 1/2" conduits or when wires must be pulled through elbows before making the turn into another EMT length. Bridgeport pull elbows come ready with a cover and gasket that seal out dirt, dust and moisture. This removable cover allows for wires to be pulled and fed back into pipes, changing the direction as they enter another EMT section. The zinc-plated steel screws included on Bridgeport pull elbows secure the connection. This pull elbow meets Nema Standard: FB-1 and UL Standard: UL-514B.
QTY
  • Product Description
  • Features
  • Specifications
The Bridgeport 61-DC 1/2" EMT Pull Elbow is used to make 90° turns in 1/2" conduits or when wires must be pulled through elbows before making the turn into another EMT length. Bridgeport pull elbows come ready with a cover and gasket that seal out dirt, dust and moisture. This removable cover allows for wires to be pulled and fed back into pipes, changing the direction as they enter another EMT section. The zinc-plated steel screws included on Bridgeport pull elbows secure the connection. This pull elbow meets Nema Standard: FB-1 and UL Standard: UL-514B.
  • Prop 65
    • PROP65 https://www.p65warnings.ca.gov/
  • Certifications and Standards
    • UL-514B
  • Specifications
    • Country of Origin : India
    • Length : 1.3125 in
    • Weight : 19.8 lbs
    • Removable Aluminum Cover : Bridgeport pull elbows feature a removable aluminum cover to facilitate wire pulling and ensure easy access for maintenance or future system changes
    • Zinc Die Cast Body : The zinc die cast body is naturally resistant to corrosion for long-term use in any environment
    • Zinc-Plated Steel Set Screws : The set screws ensure that the EMT conduit can be securely fastened once in place
    • Collection Folder : 61-DC
    • NPD Date Electrical : 07/01/2008 00:00:00
    • MATERIAL : Zinc Die Cast
    • WARRANTY : 1 Year
    • Division : Electrical H1
    • Field Application : Used to connect two lengths of EMT to form a 90 Degree bend. Removable Aluminum cover to facilitate wire pulling.
    • UL File # : E9391
    • FINISH : Ball burnished, mirror smooth, Cover: Zinc electro-plate
    • Sub-Division : Electrical-E H2
    • NEMA Rating : FB-1
    • BPT Trade Size : 1/2"