This XMLP electronic pressure sensor has a a pressure rating of 16 bar, a M12 connector electrical connection and a G 1/4 a DIN 3852-e male fluid connection. This pressure transmitter is designed for accurate pressure control of air, fresh water, between 0°C and +135°C, refrigeration fluids, hydraulic oils and any fluid compatible with AISI 304 stainless steel, between -30°C and +135°C. It is fixed directly on tubage. It provides high corrosion resistance AISI 316L stainless steel and fluorocarbon resin pressure chamber for maximum longevity. 10 million cycles mechanical durability for minimum required maintenance on your pressurized fluid circuits. It complies with EN/IEC 61326-2-3, RCM, cULus, EAC. Its very short body makes it ideal for fitting in tight tubage areas. This product replaces XMLP016BD71V.

• Specifications
• Pressure Sensor Type : pressure transmitter
• Type Of Output Signal : analogue
• Range Of Product : Telemecanique Pressure sensors XM
• Electrical Connection : 1 male connector M12 4 pins
• Pressure Sensor Size : 16-16 bar
• Product Or Component Type : electronic pressure sensors
• Type Of Packing : individual
• Local Display : without
• Pressure Sensor Name : XMLP
• Current Consumption : < 7 mA
• Fluid Connection Type : G 1/4A (male) DIN 3852-E
• Analogue Output Function : 0...10 V, 3-wire
• Controlled Fluid : air -30-135 °C) || fresh water 0-135 °C) || hydraulic oil -30-135 °C) || gas -30-135 °C) || refrigeration fluid -30-135 °C)
• Quantity Per Set : set of 1
• Electrical Circuit Type : control circuit
• [Us] Rated Supply Voltage : 24 V DC SELV 12-33 V)
• Complementary
• Accuracy : 0.1 % of the measuring range
• Diameter : 26 mm
• [Uimp] Rated Impulse Withstand Voltage : 0.5 kV
• Drift Of The Zero Point : +/- 0.02 % of measuring range/°K
• Electromagnetic Compatibility : electrical fast transient/burst immunity test EN/IEC 61000-4-4 2 kV || electrostatic discharge immunity test EN/IEC 61000-4-2 8 kV air, 4 kV contact || 1.2/50 µs shock waves immunity test EN/IEC 61000-4-5 1 kV 42 Ohm || immunity to magnetic fields EN/IEC 61000-4-8 100 A/m 50 Hz || susceptibility to electromagnetic fields EN/IEC 61000-4-3 10 V/m 80...3000 MHz || radiated RF fields EN/IEC 61000-4-6 10 V 0.01...80 MHz
• Materials In Contact With Fluid : stainless steel AISI 316L || fluorocarbon FPM
• Length : 38.1 mm
• Net Weight : 0.09 kg
• Mechanical Durability : 10000000 cycles
• Operating Position : any position
• Measurement Accuracy : +/- 0.5 % of the measuring range
• Protection Type : reverse polarity || load short-circuit
• Drift Of The Sensitivity : +/- 0.02 % of measuring range/°K
• Maximum Permissible Accidental Pressure : 48 bar
• Destruction Pressure : 96 bar
• Response Time On Output : <= 2 ms 10...90 % of full scale
• Pressure Setting Range : 0-16 bar
• Offer Sustainability
• Rohs Exemption Information : Yes
• Mercury Free : Yes
• Environmental Disclosure : ENVPEP1511013EN
• Sustainable Offer Status : Green Premium product
• Reach Regulation : Reference contains Substances of Very High Concern above the threshold
• California Proposition 65 : WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Eu Rohs Directive : Pro-active compliance (Product out of EU RoHS legal scope)
• Environment
• Product Certifications : EAC || cULus || CE || RCM
• Ambient Air Temperature For Operation : -30-85 °C
• Standards : EN/IEC 61326-2-3 || NSF ANSI 61
• Shock Resistance : 100 gn 11 ms EN/IEC 60068-2-27
• Vibration Resistance : 20 gn 15-2000 Hz) EN/IEC 60068-2-6
• Ip Degree Of Protection : IP65 conforming to EN/IEC 60529 || IP67 conforming to EN/IEC 60529 || IP69K conforming to EN/IEC 60529
• Ambient Air Temperature For Storage : -50-100 °C
• Protective Treatment : TC