The Spike is a, one-piece, vibration resistant anchor for use in concrete block or stone. Several head styles, including Tamperproof versions, and anchor materials are available. The Spike anchor is formed with an “s” shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

• Type 316 Stainless Steel
• Zinc Plated Carbon Steel
• Lightweight concrete
• Normal-Weight concrete
• Grouted Concrete Masonry (CMU)
• Flat Head
• Piope
• Mushroom Head
• Forming
• Tie-Wire
• Mushroom and flat head Spike anchors are tamper-proof
• Pre-expanded anchor design allows for easy installation
• Forming Spike, which is removable, can be used for temporary installations
• Pipe and Tie-wire Spike is an easy to install alternative to direct fastening (e.g. powder actuated)
• Tested in accordance with ASTM E488 and AC01 criteria
• Exterior Applications
• Concrete Formwork
• Tamperproof Applications
• Pipe Hanging
• Cable Trays and Strut
• Metal Track Attachments
• For roofing applications see the Roofing Spike product information
• CSI Divisions: 03 16 00 - Concrete Anchors, 04 05 19.16 - Masonry Anchors and 05 05 19 - Post-Installed Concrete Anchors. Pre-expanded anchors shall be Spike as supplied by Powers Fasteners, Inc., Brewster, NY.

• Anchor Size Range (TYP.) : 3/16" diameter through 1/2" diameters
• Std. Box : 100
• Anchor Size : 1/4"
• Drill Dia. : 1/4"
• Standard Carton : 500
• Min. Embed. : 1-1/8"
• Wt. /100(lbs.) : 37288
• Tie-Wire Hole size : 9/32"