3M™ Motor Lead Pigtail Splice 5301, 1 kV, 1-Hole Lug Connection, Feeder: 10-4 AWG , Motor Lead: 12-4 AWG , 1/Case

600V MOTOR KIT

MMM5301 5301 054007122630
77.32 / Kit
  • Splice Type: Pigtail Only
  • Voltage: 1 kV
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: • (3) Pigtail lug covers • (3) Mastic sealing strips • (3) Locking pins (kits 5302–5304 only) • (3) Tubes of silicone grease • (1) Instruction sheet
  • Product Description
  • Features
  • Specifications
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: • (3) Pigtail lug covers • (3) Mastic sealing strips • (3) Locking pins (kits 5302–5304 only) • (3) Tubes of silicone grease • (1) Instruction sheet
  • Features
    • Splices motor lead cables to incoming feeder cables
    • Designed to use with copper compression, 1-hole lugs
    • Slip-on lug cover is made of durable EPDM rubber
    • For pigtail (stub) connections at 1000V or less
    • Includes 3 each of pigtail lug covers, mastic sealing strips, and tubes of silicone grease, plus an instruction sheet
    • CSA Certified and RoHS 2011/65/EU Compliant‎
  • Specifications
    • Country of Origin : US
    • Maximum Feeder Lead Size : 4 AWG
    • Maximum Motor Lead Size : 4 AWG
    • Maximum Operating Voltage : 1 kV
    • Splice Type : Pigtail Only
    • Connection Type : Pigtail (Non-Shielded)
    • Insulation Outside Diameter : 0.17-0.36 Inch
    • Insulation Outside Diameter Range : 0.17-0.36 in
    • Insulation Outside Diameter Range (Metric) : 4.3 - 9.1 mm
    • Lug Cover Inner Diameter : 0.70 in
    • Lug Cover Inner Diameter (Metric) : 17.8 mm
    • Lug Cover Length : 3.4 in
    • Lug Cover Length (Metric) : 86.4 mm
    • Manufacturing Origin : USA
    • Maximum Bolt Length : 1/2 in
    • Maximum Bolt Length (Metric) : 12.7 mm
    • Range Feeder Cable (AWG & kcmil) : 10-4
    • RoHS EU Comments : RoHS 2011/65/EU compliant without exemption
    • Units per Case : 1.0
    • Voltage : 1 kV and less