3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.

• Features
• Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
• Cold shrink tube seals from the bottom of the elbow to the cable jacket
• Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
• High-quality, peroxide-cured EPDM provides better insulation
• Meets ANSI/IEEE Standard 386.

• Specifications
• Maximum Insulation Outer Diameter (Imperial) : 1.1 in
• Maximum Insulation Outer Diameter (Metric) : 28.0 mm
• Maximum Operating Voltage : 15 kV
• Product Type : Accessory
• Cable Type : Stranded
• Cable Voltage Rating : 8 kV
• Component Type : Elbow
• Current Rating : 200 Ampere
• Family : 3M™ 200 Amp 5-15 kV Industrial Loadbreak Elbow
• Includes Compression Connector : No
• Insulation Diameter Range : 0.785-0.970 in
• Insulation Diameter Range (Metric) : 19.9-24.6 mm
• Insulation Level : 133%
• Insulation Outside Diameter Range : 0.7 to 0.91 in
• Manufacturing Origin : USA
• Product Series : 5810
• RoHS EU Comments : Contact 3M for information
• Separable Connector Type : Load Break Elbows
• Units per Case : 1.0
• Country of Origin : US