The Pro3000™ Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probe’s powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy. The Pro3000™ toner’s patented SmartTone™ technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

• Pro3000 Design
• The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments. Probe features:Loud large speaker amplifies tone through walls, enclosure, wood or plasterEasy-to-use adjustable volume control dial“Quick-twist” tip for easy replacementFree spare tip inside Pro3000 Tone and Probe Kit
• The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.
• Loud large speaker amplifies tone through walls, enclosure, wood or plaster
• Easy-to-use adjustable volume control dial
• “Quick-twist” tip for easy replacement
• Free spare tip inside Pro3000 Tone and Probe Kit
• Pro3000F Filtered Probe
• Signal Interference from sources in the environment can make tracing cable a frustrating process. The Pro3000F Filter probe “Stops the Buzz” by obstructing these signals allowing you to hear the tone you are tracing loud and clear. The Pro3000F is available in 2 versions:
• The Pro3000F60 which filters out 60 Hz interference which is the standard frequency in North America
• The Pro3000F50 which filters out 50 Hz interference which is common in Europe, Asia, and the Pacific.
• Pro3000 Capability
• Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.
• SmartTone technology
• Send tone signal up to 10 miles on most cables
• Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
• External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
• Continuity testing
• Line polarity confirmation
• Features
• Clear - Innovative filter technology blocks interference (“buzz”) that makes tracing difficult (“F” models only)
• Precise – SmartTone™ technology provides five distinct tones for exact pair identification
• Sends loud tone up to 10 miles (16 kilometers) on most cables
• Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures
• Angled bed-of-nails clips allow easy access to individual pairs
• RJ-11 connector is ideal for use on telephone jacks
• Attach nylon pouch (included in kit) to your belt for easy transport

• Pro3000 Analog Toner Specifications
• User interface : Tone mode LED || Slide switch selects Continuity or Tone Mode || Push button switch selects SOLID, ALT or OFF || Continuity/Polarity LED
• Solid Frequency : 1000 Hz nominal
• Alternating Frequency : 1000/1500 Hz nominal
• Over Voltage Protection : 60 Vdc in Toner/Polarity Mode
• Output Power in Tone Mode : 8 dbm into 600 ohms
• Output Voltage Level in Continuity Mode : 8 Vdc with fresh battery
• Battery : 9V alkaline
• Temperature : Operating: -20° C to 60° C, Storage: -40° C to 70° C
• Case dimensions : 2. 7 in. x 2. 4 in. x 1. 4 in. (6. 9 cm x 6. 1 cm x 3. 6 cm)
• Pro3000 Analog Probe Specifications
• User interface : Volume dial || ON/OFF push button || 3. 5 mm earphone jack || Replaceable tip
• Battery : 9V alkaline
• Temperature : Operating: -20° C to 60° C, Storage: -40° C to 70° C
• Case dimensions : 9. 8 in. x 1. 6 in. x 1. 3 in. (24. 9 cm x 4. 1 cm x 3. 3 cm)