PUSH WIRE® connector for junction boxes; 4-conductor; transparent housing; orange face

PUSHWIRE CONN 4C ORANGE 100PK

WGO773164 773164 WGO773164
0.16 / EA
http://schema.org/OutOfStock
  • Actuator: Push-button
  • Conductor Material: Aluminum, Copper
  • Conductor Size: 12 AWG, 2.5 mm
  • Country of Origin: Germany
  • Current: 24 A
  • Depth: 0.768 in, 19.5 mm
  • Height: 0.516 in, 13.1 mm
  • Operating Temperature: 105 °C
  • Package Type: Box
  • Strip Length: 0.47 in, 12 mm
  • Weight: 2.677 g
  • Width: 0.512 in, 13 mm
QTY
  • Features
  • Specifications
  • Approvals
    • DEKRA Certification B.V., CSA, 15411 (LR46759), C22.2
    • UL International Germany GmbH, UL, E69654, UL 486C
  • Ratings Per Iec/En
    • Ratings per : IEC/EN 60664-1
    • Nominal voltage (II/2) : 400 V
    • Rated surge voltage (II/2) : 4 kV
    • Rated current : 24 A
    • Legend (ratings) : (II / 2) ≙ Overvoltage category II / Pollution degree 2
  • Environmental Requirements
    • Continuous operating temperature : 105 °C
  • Physical Data
    • Width : 13 mm / 0.512 inches
    • Height : 13.1 mm / 0.516 inches
    • Depth : 19.5 mm / 0.768 inches
  • Material Data
  • Specifications
    • Product Group Code : 0007
  • Commercial Data
    • Packaging type : Box
    • Country of origin : DE
    • GTIN : 4044918398022
  • Notes
    • Safety information : In grounded power lines
  • Connection 1
    • Connection technology : PUSH WIRE®
    • Actuation type : Push-in
    • Connectable conductor materials : Copper || Aluminum
    • Connectable conductor materials (note) : Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste 249-130 is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
    • Solid conductor : 0.75 … 2.5 mm² / 18 … 12 AWG
    • Stranded conductor : 1.5 … 2.5 mm² / 16 … 12 AWG
    • Strip length : 12 mm / 0.47 inches
    • Wiring direction : Side-entry wiring